COMPATIBLE: (6.2L - LT1)
2015 - 2019 CHEVROLET CORVETTE STINGRAY
2017 - 2019 CHEVROLET CORVETTE GRAND SPORT
2017 - 2019 CHEVROLET CORVETTE Z51
CORSA's C7 Carbon Fiber Air Intake blends aesthetics and engineering to deliver in a single package. It outflows the stock intake by 14% and delivers up to 15HP and 15 FT LBS Torque without a tune. Intake efficiently directs airflow from the filter to the throttle body, streamlines airflow eliminating any calibration concerns, and helps increase throttle response
-
100% Carbon Fiber Construction
-
Machined Mass Air Flow Mounting Bracket
-
Outflows Stock Intake creating more HP & TQ
-
Free-Flowing High-Performance Filtration
-
Installs in 1 hour or less
-
Limited Lifetime Warranty
DryTech 3D No Oiled High Flow Synthetic Dry Air Filter
CORSA Performance DryTech 3D Air Filters maximize power and filtration performance while reducing maintenance. Using specialized hydrophobic polysynthetic fibers, CORSA Performance DryTech 3D Filters boost filtration capacity, lengthening time between maintenance intervals up to 50K miles depending on driving conditions. By vastly increasing media depth through unique pleating geometry, each filter traps more particulate than traditional cone style filters allowing you to drive further before requiring service.
DryTech 3D Filters reduce maintenance time by resisting saturation that occurs during washing, dropping drying time to as little as 2 hours. For an even faster clean, vacuum off surface particulate to restore filter performance. Recommended for consumers who prefer the ease of maintenance of a non-oiled filter but the performance gains of a traditional cotton gauze media.
Will not void Factory Warranty
-
High-Performance Free-Flowing Synthetic Dry Filter
-
Oil-Free
-
Up to 50K Miles Between Maintenance Intervals
-
Up to 98% Filtration Efficiency
-
Ideal for any driving style
-
Made in the USA
-
1 Year Warranty
PRODUCT CARE: Dry Filter (DryTech 3D)
Cleaning your DryTech 3D: One of the benefits of using a DryTech 3D filter is that you can clean and reuse it. Depending on driving and environmental conditions; the filter will become caked with dirt and require cleaning. It is recommended to clean the filter on your CORSA Intake at least two times a year. Replacement filters are available through CORSA. Also, if you experience a sudden decrease in mileage or engine performance, the filter will need to be cleaned.
QUICK CLEANING:
1.Vacuum free debris from the surface of the filter.
2.Remove the filter from your air intake and tap it on a hard surface to remove any loose dirt.
DO NOT OIL! Oiling your Dry filter will ruin its effectiveness and require immediate replacement.
DEEP CLEANING:
1.Vacuum free debris from the surface of the filter.
2.Remove the filter from your air intake and tap it on a hard surface to remove any loose dirt.
3.Liberally spray the filter with filter cleaner and allow it to soak in for about 10 minutes. Avoid petroleum based products because they will soften and destroy sealing edges.
4.Rinse off the dirt from the inside of the filter out. Never use high pressure nozzles or air; they could tear and distort the cotton gauze media.
5. Allow the filter to air dry in a clean area. Never use applied heat or an air vent to dry the filter. Do NOT reinstall a wet or damp filter. The oiled filter must be completely dry before it is installed.
DO NOT OIL! Oiling your Dry filter will ruin its effectiveness and require immediate replacement.
MaxFlow 5 Oiled Cotton Gauze High Flow Air Filter
CORSA Performance MaxFlow 5 Filters offer a washable and reusable replacement to your stock air filter unleashing greater airflow for peak performance gains. Each MaxFlow 5 Filter is engineered utilizing carefully selected media that delivers superior engine protection and up to 98% filter efficiency and maximum flow. By carefully designing the pleat structure of the MaxFlow 5 Filter, loading capacity has increased allowing for extended maintenance intervals (Up to 40K Miles).
Each filter is manufactured using a 100% polyurethane frame and flanges with progressive fit ribbing to create a reliable air-tight mesh point between filter and air duct.
Recommended for High-performance street vehicles looking for maximum Horespower and Torque gains
-
High-Performance Multi-Layer Oiled Filter
-
Up to 40K Miles between Maintenance Intervals
-
Over 98% Filtration Efficiency
-
Ideal for on-road driving conditions
-
Made in the USA
-
1 Year Warranty
PRODUCT CARE: Oiled Filters (MaxFlow 5 & Pro5)
Cleaning your Oiled Filter is Easy: One of the benefits of using a Pro5 or MaxFlow5 Oiled filter is that you can clean and reuse the cotton gauze filter. Depending on driving and environmental conditions; the filter will become caked with dirt and require cleaning. A two-stage filter recharger kit with cleaner and oil is required. It is recommended to clean the filter on your CORSA Intake at least two times a year. Replacement filters are available through CORSA. Also, if you experience a sudden decrease in mileage or engine performance, the filter will need to be cleaned.
REMOVE:
Remove the oiled filter from your air intake and tap it on a hard surface to remove any loose dirt.
SPRAY:
Liberally spray the filter with filter cleaner and allow it to soak in for about 10 minutes. Avoid petroleum based products because they will soften and destroy sealing edges.
RINSE:
Rinse off the dirt from the inside of the filter out. Never use high pressure nozzles or air; they could tear and distort the cotton gauze media.
DRY:
Allow the filter to air dry in a clean area. Never use applied heat or an air vent to dry the filter. Do NOT reinstall a wet or damp filter. The oiled filter must be completely dry before it is installed.
OIL:
Using air filter oil, apply a thin coating to each pleat. The oil will soak into the pleat and after 20 minutes you will see areas that need to be touched up with more oil.
Install Guide:
Warranty:
