COMPATIBLE: (3.0L-VR30DDTT )

2023 - 2024 NISSAN Z 

Track Edition Exhaust:

The Track Edition is for those who like their experience within the cabin to be on the rowdier side of the spectrum. The rear 180 Technology® resonators are omitted from the Track Edition in exchange for straight sections. The result is more pronounced volume within the cabin during mid-range acceleration/deceleration and cruising speeds and may be too much for many–especially with aftermarket components upstream. Due to this reason, AWE Track Edition Exhausts cannot be returned based on sound preference. You’ve been warned.

THE NEW SOUND OF Z

The Options:

The AWE Exhaust Suite for the Nissan Z is comprised of two variants: the Touring Edition and the Track Edition. Both configurations are packed with identical feature sets and capable of the same performance. The primary difference being AWE’s patented drone-canceling solution, 180 Technology® – which will be crucial for drivers looking to swap out components upstream. Read carefully.

AWE Catback Exhausts for Nissan Z:

• Full dual 3” design for the RZ34.Each exhaust comes complete with bespoke adapter plates and gaskets to AWE’s dual 3” system to factory downpipes. If you’re mating to aftermarket components, this hardware is not needed.

• Precision X-pipe & robust resonators produce a clean, exotic soundtrack. A symmetric X-pipe with tailored geometry and robust resonators produces a smooth, rasp-free exotic soundtrack out of the Z’s 3.0LTT engine. AWE’s resonators are not of normal breed– instead of breaking down over time like most, AWE’s straight-through resonators are created with a special recipe of internals that enable ample tone control for the long haul.

• Dual 5” double-walled, slash-cut tips. Available in your choice of chrome silver or diamond black.

• Dyno-proven max gains of +6 hp and +14 lb-ft of torque at the wheels (factory downpipes). All results and no fluff. Straight from our in-house Mustang AWD-500-SE dyno with AWE’s Touring Edition Exhaust on an otherwise stock Z.

• Designed & engineered for both automatic & manual transmissions, with or without lower DPs. It’s all about frequencies and shift points. We developed, engineered, and tested on both transmission offerings to ensure your experience is sound regardless of what your left foot is doing.

• Proudly designed, engineered, and manufactured at AWE. Made in Pennsylvania, USA using CNC mandrel-bent, U.S.-sourced .065” wall T304L stainless steel.

• Guaranteed for life. Perfect Fitment Guaranteed. AWE No CEL guarantee. Lifetime Warranty. All come standard.

What is 180 Technology®?

AWE's patented 180 Technology® works a little something like this: As exhaust gases exit the engine and flow into an AWE 180 Technology®-equipped resonator, they pass through strategically located ports, and into reflection chambers.

Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. Depending on the sound requirements of each vehicle, AWE acoustic engineers adjust the size and location of the ports and the chambers. By controlling the size and location of these key elements, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves re-join the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.

Consistency through change.

AWE 180 Technology® is not on a “one size fits all” concept. Rather, AWE engineers design sound cancelation resonators based upon the specific acoustics generated by vehicle types, thereby ensuring perfect sound, every time. It’s one of the reasons AWE exhausts have earned a reputation for the perfect tone, regardless of application.

What it means to you.

The result? The removal of unwanted tones in all AWE 180 Technology®-equipped exhaust systems. The sound produced by this formula is the perfect, signature note. Unlocked performance and spot-on tone, every time.

Install Guide:

Warranty: