🏁 RACER SUPPORT - (888) 257-1077 🏁
1 21
APR®  |  SKU: CBK0015

APR® (14-18) Audi RS6/RS7 304SS Dual 2.75" to Quad 2.5" Cat-Back System with Center Muffler

£2,474.80
Shipping calculated at checkout.

Question? Call us at (888) 257-1077 🏁 (M-F 9-5 ET)

THIS PRODUCT HAS BEEN DISCONTINUED. THIS ITEM IS NO LONGER AVAILABLE TO PURCHASE. THIS LISTING IS OFFERED AS A LEGACY REFERENCE.

Description

Compatible: (4.0L)

2014 - 2018 Audi RS6

2014 - 2018 Audi RS7

 

THIS PRODUCT CAN BE SHIPPED TO CALIFORNIA 

Please note, facelifted C7.5 models require the valve extension harness (RS100004)



The APR Catback Exhaust System personalizes your sound and performance. Beautifully hand-crafted T304-stainless-steel components adorn the system with stunning TIG-welding throughout. Our straight-through brushed-finished mufflers smooth the exhaust note to a deep growl, without adding restrictions. Strong high-quality bracketry and OEM-style clamps hold the system steadily in place, making the install or removal a snap, and fitment simple, yet precise. Cast 2.75" to dual 2.5" rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system. Our cast valve housings enable the vehicle to be fitted with the factory electronic valve actuators, retaining OEM valve operation. An optional center muffler / Center muffler delete is available.
  • T304 stainless-steel construction
  • Argon-back-purged TIG welding throughout
  • Dual 2.75" to quad 2.5" mandrel-bent brushed tubing
  • Ultra-smooth cast 2.75" to dual 2.5" splitters
  • Brushed-finished straight-through sound-absorption mufflers (optional center muffler delete)
  • Cast valve housings and brackets for OEM electronic actuators
  • Rugged and precise mounting brackets
  • CNC bent and laser cut tunnel brace for added chassis rigidity
  • OEM style slip clamps and Torca AccuSeal T304 tip clamps
  • Direct bolt-on fit
  • Low-profile design, suitable for lowered vehicles
  • Larger diameter piping compared to stock
  • Larger diameter tips compared to stock
  • In-house design with world-class manufacturing and quality control
  • Easy to install
Bending Mandrel
Brackets Precise
Brand APR
Center Muffler Yes
Clamp Style Slip Clamp
Emission Code 5
Exit Tube Diameter (in) 2.5
Material T304 Stainless Steel
Muffler Finish Brushed
Muffler Style Sound Absorption
Product Type Exhaust Catback System
Splitter Cast
Tube Connection Butt Joint
Tube Diameter (in) 2.75
Tube Finish Brushed
Valve Actuation OEM
Welding TIG
UPC 810009932079
Part Number CBK0015



THE APR CATBACK EXHAUST SUITE IS HERE!

The APR Catback Exhaust System personalizes your sound and performance. Beautifully hand-crafted T304-stainless-steel components adorn the system with stunning TIG-welding throughout. Our straight-through brushed-finished mufflers smooth the exhaust note to a deep growl, without adding restrictions. Strong high-quality bracketry and OEM-style clamps hold the system steadily in place, making the install or removal a snap, and fitment simple, yet precise. Cast 2.75” to dual 2.5” rear splitter creates an ultra-smooth transition, steadily feeding exhaust gasses out of the system. Our cast valve housings enable the vehicle to be fitted with the factory electronic valve actuators, retaining OEM valve operation. An optional center muffler / Center muffler delete is available. 

QUICK FACTS

  • T304 stainless-steel construction
  • Argon-back-purged TIG welding throughout
  • Dual 2.75” to quad 2.5” mandrel-bent brushed tubing
  • Ultra-smooth cast 2.75” to dual 2.5” splitters
  • Brushed-finished straight-through sound-absorption mufflers with an optional center muffler or straight pipes
  • Cast valve housings and brackets for OEM electronic actuators
  • Rugged and precise mounting brackets
  • CNC bent and laser cut tunnel brace for added chassis rigidity
  • OEM style slip clamps
  • Direct fit
  • Low-profile design, suitable for lowered vehicles
  • Larger diameter piping compared to stock
  • Larger diameter tips compared to stock
  • In-house design with world-class manufacturing and quality control
  • Easy to install


SYSTEM OVERVIEW

Our exhaust system uses larger piping compared to the factory exhaust system, yet weighs less in the base configuration. We use dual 2.75" OD piping, which then splits to a quad 2.5" design. The factory system uses 2.375" piping . The system shown below includes the optional center muffler.


REAR MUFFLERS

The mufflers are responsible for reducing the exhaust note and do so without adding unnecessary restrictions to the system. Each unit features two straight-through perforated tubes that are tightly wrapped with stainless steel and fiberglass material. With the valves closed, the system is tamer, but once opened, the system sounds deep, throaty and aggressive! The mufflers have a beautiful brushed finish, and are tucked high in the exhaust tunnel, making them perfect for lowered vehicles and a treat to see when looking at the vehicle from the rear.

CENTER SECTION

The center section is available with an optional front muffler. this muffler is responsible for reducing sound volume further. This configuration is recommended for customers who want a tamer exhaust note. Both configurations are shown below.


CAST SPLITTER

We cast the rear muffler splitters to maximize the system’s performance by keeping exhaust velocity high and back pressure low. This is accomplished by gradually splitting the system from a single 2.75” pipe to dual 2.5” pipes. The organically shaped casting allows us to make this transition gradually as to not disturb the flow of gasses.


EXHAUST VALVES

Our system features two valves that allow control of the volume of the system via the factory exhaust valve actuators. In doing so, the system can go from tame to aggressive instantly! Unlike pneumatic systems, and other common valves found in the market today, our system maintains identical OEM operation all the way down to the factory valve actuation angles. Furthermore, the system is compatible with aftermarket exhaust remotes, allowing end users to manually open the system at the click of a button. We cast the valve housings out of T304 stainless-steel. Internally the system uses CNC-machined T303 components and brass bushings, which have stood up to our extreme torture testing. All necessary hardware is welded into place and is designed to combat heat and vibration for years to come.

BRACKETS

Our brackets ensure a strong and precise fit, every time. With our design, you’ll never need to worry about the brackets sagging and losing their shape over time, or the post slipping out of the hangers. The brackets are rigid, exact in their position, fit snugly in place and are made to stand the test of time.

TUBING AND WELDS

We use T304 stainless steel tubing throughout. We brush and de-burr all pipes, use mandrel bending techniques to ensure the pipes keep a constant diameter throughout, and use argon-back purged TIG welding for a strong and attractive weld.

TIPS

The factory exhaust tips are integrated into the rear bumper valance. APR retains this layout and places the exhaust outlets within, making the system compatible with factory and aftermarket tips.


TUNNEL BRACE

The factory stamped steel tunnel brace leaves little to be desired. We’ve redesigned ours to sit slightly lower in the tunnel to allow for larger exhaust tubing. As an added benefit, the CNC-bent laser-cut brace adds additional structural rigidity to the chassis!


CLAMPS

Our system uses OEM-style low-profile slip clamps. Our clamp selection allows the system to sit high in the exhaust tunnel, as is favored by lowered vehicles, with ultimate compatibility no matter what other components you may have. The clamps make for easy swapping of the mid section, and slide out of the way to make adding or components easy. Each connection point is strategically placed to ensure the system has minimal opportunity to rotate during install or during years of heavy driving.


COMPATIBILITY

We’ve designed our system to be 100% bolt-on.


OPTIONAL X-PIPE

For vehicles with 3" midpipes and APR Catback Exhaust System, the APR X-Pipe is a must have. This upgrade creates a smooth transition between the two systems and integrates an x-pipe that reduces backpressure. This upgrade smooths out the exhaust note for a more refined sound profile while also increasing peak torque. Like the rest of the system, the x-pipe is constructed from T304 stainless steel, beautifully TIG welded, and includes all new APR slip clamps.



Founded in 1997, APR is the global leader in performance aftermarket products for Volkswagen, Audi, Seat, Skoda, Porsche, and other vehicles. APR develops and manufactures hardware, software, calibration & data-logging tools for engine and transmission controllers, including intakes, exhaust systems, intercoolers, turbocharger systems, suspension, brake systems, wheels, and more. APR delivers software via a 24-hour automated global delivery system from its 80,000 square foot state of the art facility in Opelika, Alabama.

Install Guide:

 

Warranty:

VEHICLE FITMENT
Back to top