JMS®

JMS® (15-17) SRT Hellcat FuelMax V2 Fuel Pump Voltage Booster

  • Sale
  • Regular price $599.00




Compatible: (6.2L)

2015 - 2017 Dodge Challenger SRT Hellcat

2015 - 2017 Dodge Charger SRT Hellcat

 



Activation - MAF/MAP/TPS or Ground


This product is NOT legal for installation on vehicles required to meet CARB standards and/or registered in California and other states following CARB standards 

POWERMAX V2 FUELMAX 22 VOLT/44 AMP SINGLE OUTPUT PLUG AND PLAY VOLTAGE BOOSTER

INCREASE THE OUTPUT OF ANY ELECTRIC FUEL PUMP BY UP TO 85!

WHY REPLACE YOUR FUEL PUMP WHEN YOU CAN RELIABLY INCREASE ITS OUTPUT WITH FUELMAX-

USE FUELMAX V2 TO QUICKLY AND EASILY INCREASE YOUR STOCK FUEL PUMPS OUTPUT!

FUELMAX VERSION 2 UPGRADES INCLUDE: NEW CASE HIGHER OUTPUT AND MORE FEATURES!!

FUELMAX BOOSTS & REGULATES VOLTAGE ON ALL VEHICLES FROM 14.4 TO MAX OUTPUT OF 22 VOLTS.

SUPPORT UP TO 1000HP WITH THE STOCK FUEL PUMP!

 

SIMPLE INSTALLATION: FUELMAX PLUGS INTO YOUR EXISTING FUEL PUMP +12V DC DRIVER/CONTROL MODULE. COMPATIBLE WITH ALL 12V OR 16V BATTERY SYSTEMS.

WORKS ON ALL VEHICLES: DOMESTIC AND IMPORT VEHICLES & RACE CARS WITH FACTORY IN-TANK OR EXTERNAL ELECTRIC FUEL PUMPS. ALSO WORKS WITH AFTERMARKET FUEL PUMPS I.E. WELDON AEROMOTIVE HOLLEY ETC&HELLIP

HIGH QUALITY USER ADJUSTABLE HOBBS SWITCH: PRESET 5PSI USER ADJUSTABLE FROM 3PSI TO 7PSI. OR ACCELERATOR PEDAL ACTIVATION HARNESS DEPENDING UPON PRODUCT APPLICATION.

ELIMINATE FUEL PRESSURE SPIKES! ADJUSTABLE VOLTAGE RAMP-IN AND RAMP-OUT ALLOWS YOU TO CHOOSE A TIME RAMP OR FROM A MONITORED 0-5V SENSOR.

GREEN STATUS LED: KNOW AT A GLANCE WHAT THE UNIT IS DOING. BLINKING LED BOOSTING VOLTAGE.

 

EACH FUELMAX V2 KIT CONTAINS: 44 AMP POWERMAX V2 VOLTAGE BOOSTER WIRING HARNESS INSTALLATION KIT AND SET OF INSTRUCTIONS.














 
PowerMAX v2 • SparkMAX 25V or 31V • Universal Splice-In Ignition Booster
 

Double the output of your ignition system.

Eliminate spark-blow-out and run a wider gap on your spark-plug.

Use PowerMAX v2 to quickly and easily increase the output of your ignition system!


PowerMAX Version 2 upgrades include: New Case Higher Output & More Features!!


PM-2100 boosts & regulates the ignition voltage to 14.4v all of the time. 


Designed to be activated at Wide Open Throttle. 

 

 
  • Simple installation: PowerMAX splices into your existing ignition coil +12V DC feed wire.
  • Compatible with all 12V or 16V battery systems
  • Works on all Coil on Plug ignition systems.
  • Eliminate Spark-Blow-Out
  • Enjoy smooth acceleration and increased economy.
  • High Quality User Adjustable Hobbs Switch: Preset @ 5psi User Adjustable from 3psi to 7psi
  • Adjustable Voltage Ramp In / Ramp Out • Choose a Time Ramp or from a monitored 0-5v sensor
  • Green Status LED: Know at a glance what the unit is doing.  
  • Blinking LED = Boosting Voltage
  • Optional Remote Voltage Control Knob: Over-Ride the voltage output when the knob is connected (PM-2999)
  • Enable Voltage Boosting with Ground or via a monitored 0-5v external sensor.

Each PowerMAX v2 Kit Contains: 44 Amp PowerMAX V2 Voltage Booster Wiring Harness Installation Kit Set of Instructions

 
Installation Kit Contains: 1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi) 1 - Fitting 1/8npt Female to 3/16" Male Barb 1 - Vacuum Tee 3/16" x 3/16" x 3/16" 1 - Vacuum Tee 1/4" x 1/4" x 3/16" 1 - Vacuum Tee 3/8" x 3/8" x 3/16" 1 Foot of 5/32" vacuum hose 1 - 30amp mini-fuse solder 2 - 10/12gauge Heat Shrink Butt Splices 2 - #8 stud 18/22 gauge wire Heat Shrink Ring Terminal 1 - 10 gauge Heat Shrink Ring Terminal 6 - Zip Ties 6 - Self drilling hex screws mini screw-driver

 

 

 

Install Guide:

 

 

 

 

 

Warranty: