There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed and installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction. Please reference our installation video for additional information.
It's time to give the intercooling system in your 2016+ Chevrolet Camaro 2.0T or 2013-2019 Cadillac ATS a complete overhaul with the Mishimoto Performance Intercooler Kit. Our bar-and-plate constructed core picks up the slack for the stock unit by offering increased heat rejection characteristics, as well as a boost in airflow. On top of the new construction, our design increases the internal core volume by 45%, and offers a whopping 239% gain in external fin surface area, making sure that the charged air running through your LTG is as chilled as possible.
Our kit also includes a set of our mandrel-bent intercooler piping featuring a range of 2.25-2.75” diameters equating in a 30% increase in volume and 10% better flow of the charged air. All together, our piping kit gits your LTG powered Camaro or ATS up to 11 additional horsepower and 9 ft-lbs of torque. We have also included a pre-welded NPT port on the cold side piping that not only allows for easy installation of your stock equipment, but also adding an aftermarket boost gauge or meth-injection is a breeze.
The Mishimoto Performance Intercooler Kit for your 2013-2019 ATS or 2016+ Camaro is available with your choice of polished or wrinkle black piping, and as always this kit is covered under the Mishimoto Lifetime Warranty.
Direct fit for the 2016+ Chevrolet Camaro 2.0T and 2013-2019 Cadillac ATS 2.0T
2" thick intercooler design optimized for maximum airflow with minimal pressure drop
45% increase in internal core volume & 239% increase in external fin surface area
78% increase in core size
Cast end tanks with internal air diverter provide optimal airflow through intercooler
30% greater internal volume than stock
10% increase in flow
Utilizes stock quick-disconnect fittings for easy installation
Pre-welded NPT port on cold-side pipe allows for quick install of aftermarket meth injection or boost gauge
