Kingman Speed® Universal Valved Exhaust Cutout Controller + Box Kit (1-Touch)
Kingman Speed® Universal Valved Exhaust Cutout Controller + Box Kit (1-Touch) is backordered and will ship as soon as it is back in stock.
Question? Call us at (888) 257-1077 🏁 (M-F 9-5 ET)
Email: info@10SecondRacing.com (24/7)
Free Shipping to Lower 48 US States ($100+)
Worldwide Shipping via UPS (Check Rates at Checkout)
Kingman Speed® Universal Valved Exhaust Cutout Controller + Box Kit (1-Touch) is backordered and will ship as soon as it is back in stock.
Description
Description
The Kingman Speed Universal Exhaust Cutout One-Touch Controller is an electronic module that automates and controls aftermarket exhaust cutout valves using a single button or switch. It lets you open or close your exhaust flaps with a single tap, set partial openings (5% to 100%), and automatically close the flaps every time you start your vehicle.
- One-Touch Operation: Press a button once to open or close the exhaust valves completely instead of holding a switch down.
- Partial Opening Control: Adjust the flap opening anywhere from 5% to 100% for fine-tuning your exhaust volume.
- Startup Initialization: Automatically closes the exhaust valves upon vehicle ignition to keep things quiet on startup.
- Wi-Fi Configuration: Connect your phone or laptop to the controller's internal Wi-Fi network (at
192.168.4.1) to customize open and close timings. - Multi-Motor Support: Can control one or two DC electric exhaust cutout motors simultaneously (10A max, 10-16V)
The controller does not come with a button or switch. There are hundreds of styles available online. For an example of the button search for APIELE BUTTON
- Single Momentary Button (v1): Press once to open, press again to close.
- Single Momentary Button (v2): Short presses open the flap progressively (e.g., 5% per tap); a long push closes it.
- Single Latched Button: Stays engaged or triggers based on the latch state.
- Two Momentary Buttons / Rocker Switch: Separate buttons or a toggle for dedicated open and close commands




