Edelbrock® GM LS7 Pro-Flo 4 EFI Traditional 4150-Style System
Edelbrock® GM LS7 Pro-Flo 4 EFI Traditional 4150-Style System

36170

Edelbrock® GM LS7 Pro-Flo 4 EFI Traditional 4150-Style System

Regular price$2,295.95
/
Shipping calculated at checkout.
  • Question? Call us at (888) 257-1077 🏁
  • Free Shipping USA (Exc. HI, AK, PR)

Compatible: (7.0L)

2014 - 2015 Chevy Camaro 

2006 - 2013 Chevy Corvette 

 

THIS PRODUCT IS NOT LEGAL FOR USE IN CA. FOR RACE USE ONLY.

 

 


The Edelbrock Pro-Flo 4 EFI Kit #36170 for the Chevy Gen IV LS7 engine is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder. This system features the high-performance super Victor single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors are included along with wire harnesses, ECU and Android-based tablet with E-Tuner Calibration app pre-installed. The Super Victor LS7 manifold is designed with a larger cross-sectional area in the plenum and larger runners for high-horsepower and/or large cubic-inch applications. The manifold is also 0.75 inch taller than the standard LS3 version to promote smoother airflow into the rectangular-port heads. This kit uses 42 Lb/Hr injectors and is rated for 675 horsepower at 58 PSI of fuel pressure. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner's initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner takes over to continually maximize the fuel map for your specific engine configuration, even compensating for changes in altitude and weather. The E-Tuner provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for. No laptop tuning is required.



System Type Traditional 4150-Style Kit
Gasket Or Seal Included Yes
Quantity Kit
Wiring Harness Included Yes
Fuel Pressure Port 1/8-27 NPT
Bore Diameter 1.75 in
Fuel Injector Type 42 lb/hr
Maximum Horsepower 675
Availability Note Available to Order
Warranty 24 Months
Distributor Cap Included Yes
Emissions Code

 

Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • This kit will require a high-pressure EFI fuel delivery system. Fuel delivery systems are available and sold separately. For the height dimensions of all Edelbrock manifolds please visit the Manifold Reference Dimensions page.
Finish Satin



Install Guide:


 

WARNING This product can expose you to chemicals including lead which is known to the State of California to cause cancer or birth defects or other reproductive harm.   www.p65warnings.ca.gov 

PDF-Material Safety Data Sheet

 

Warranty:

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.