Edelbrock® (97-07) GM LS1/LS6 Rollin&
Edelbrock® (97-07) GM LS1/LS6 Rollin&
Edelbrock® (97-07) GM LS1/LS6 Rollin&
Edelbrock® (97-07) GM LS1/LS6 Rollin&

2216

Edelbrock® (97-07) GM LS1/LS6 Rollin' Thunder Flat Tappet 230/243 Camshaft

Regular price$695.95
/
Shipping calculated at checkout.
  • In stock, ready to ship
  • THIS PRODUCT IS NOT CARB CERTIFIED
  • Question? Call us at (888) 257-1077 🏁
  • Free Shipping to Lower 48 US States ($100+)
  • MONEY-BACK GUARANTEE (ORDER SHIPS WITHIN 3 BUSINESS DAYS. RECEIVE A FULL REFUND IF NOT)
  • This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

    Compatible: (5.7L)

    2004 - 2007 Cadillac CTS-V

    1998 - 2002 Chevy Camaro

    1997 - 2004 Chevy Corvette

    1998 - 2002 Pontiac Firebird 

     

    THIS PRODUCT IS NOT LEGAL FOR USE IN CA. FOR RACE USE ONLY.

     

    Compression ratio of at least 9.5:1; Adjustable valvetrain required; For street high-performance and racing applications only; Lower than stock rear gearing; High performance torque converter (in automatic transmission equipped vehicles) are necessary.; Please be advised that an improper installation may result in LOW MILEAGE, POOR PERFORMANCE, and COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE. Installing a camshaft is a complex procedure. Please follow these instructions carefully. Failure to do so may void your warranty.

     

     

     

    Edelbrock Rollin' Thunder Camshaft #2216 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 460HP and 424 Ft Lbs of Torque when paired with Performer RPM Intake manifold #71187, Thunder Series AVS Carb #1813 and E-CNC 215 cylinder heads #79949. Use with high stall torque converter only. 

    RPM Range: 1500-6500
    Intake Duration at 050 In Lift: 230°
    Exhaust Duration at 050 In Lift: 237°
    Intake Valve Lift: 0.540"
    Exhaust Valve Lift: 0.540"
    Advertised Intake Duration: 314°
    Lobe Separation: 110°
    Intake Center Line: 106°
    Idle Vac 1000 RPM: 10" 



    Install Guide:


     

    WARNING This product can expose you to chemicals including lead which is known to the State of California to cause cancer or birth defects or other reproductive harm.   www.p65warnings.ca.gov 

    PDF-Material Safety Data Sheet

     

    Warranty:

    MONEY-BACK GUARANTEE (ORDER SHIPS WITHIN 3 BUSINESS DAYS. RECEIVE A FULL REFUND IF NOT)

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)