Compatible: (5.0L)
2011 - 2023 Ford Mustang GT
2011 - 2023 Ford F-150
Edelbrock Rollin' Thunder Camshaft #3722 is designed for 5.0L Ford V8 engines and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 300HP and 325 Ft Lbs of Torque when paired with Performer intake manifold #3821 and Performer cylinder heads #60379. May use original hydraulic roller lifters. Our #3722 camshaft is for mass-air engines only. Must use high stall torque converter. 50-State Legal E.O. #D-215-14. Camshaft specifications: - Intake duration: 220 Degrees - Exhaust duration: 220 Degrees - Intake lift: .498" - Exhaust lift: .498" - Lobe separation: 110 Degree - Intake Center Line: 110 - Vacuum: 13"
Exhaust Valve Lift With Factory Rocker Arm Ratio | 0.498 in |
---|---|
Exhaust Valve Lift With Factory Rocker Arm Ratio | 0.498 in |
Computer Controlled Compatible | Yes |
CARB Executive Order Number | D-215-14 |
Availability Note | Available to Order |
Warranty | 12 Months |
Emissions Code |
|
Hazardous Materials Warning | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
Installation Notes |
|
Advertised Exhaust Duration | 282 deg |
Advertised Intake Duration | 282 deg |
Cam Type | Roller |
Exhaust Duration at .050 inch Lift | 220 deg |
Exhaust Valve Lift | 0.311 in |
Intake Duration at .050 Inch Lift | 220 deg |
Intake Valve Lift | 0.311 in |
Intake Valve Lift with Factory Rocker Arm Ratio | 0.498 in |
Lifter Type | Roller |
Lobe Separation | 110 deg |
Install Guide:
WARNING This product can expose you to chemicals including lead which is known to the State of California to cause cancer or birth defects or other reproductive harm. www.p65warnings.ca.gov
PDF-Material Safety Data Sheet
Warranty: