Compatible: (3.0L/3.2L)
2009 Audi A4 Avant/Sedan
2008 - 2010 Audi A5 Coupe
2018 - 2020 Audi Allroad Avant
2010 - 2012 Audi S4 Sedan
2010 - 2012 Audi S5 Cabriolet
THIS PRODUCT CANNOT BE SHIPPED TO CALIFORNIA
Power for every budget, and a simple upgrade path when you’re ready
The AWE S-FLO Intake Suite is available as the full kit with carbon cover, or piece-by-piece. Start with the S-FLO Filter, later upgrade to an S-FLO Intake (“filter on a stick”), then add the S-FLO Carbon Cover for the full experience. Or, go full S-FLO Carbon Intake from the jump. The decision is yours:
The S-FLO Carbon Intake
For drivers looking for an intake that not only performs, but also looks going doing it, the AWE S-FLO Carbon Intake is the one. The S-FLO Carbon Intake is comprised of three primary components: (1) The washable S-FLO Filter and (2) our high-flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube and (3) the 2x2 twill carbon fiber cover.
By deploying the fully enclosed S-FLO Carbon Intake, the ambient ram-air is drawn into the inlet and fed beneath the S-FLO’s carbon cover, keeping it cool compared to an open element configuration susceptible to engine bay temperatures. Keeping this ambient ram-air cool results in impressive power gains filtered through the AWE S-FLO Intake.
The AWE S-FLO Carbon Intake includes the S-FLO Carbon Cover, S-FLO Intake, S-FLO Filter, and all necessary brackets and mounting hardware.
The S-FLO Intake
The AWE S-FLO Intake packs the same power as the full carbon intake, minus the carbon. The AWE S-FLO Intake is comprised of two key components: (1) The washable S-FLO Filter and (2) our high-flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube. Together, it’s a free-flowing match made in heaven, allowing optimal flow geometry through the inlet, center section, and outlet of the tube, keeping things tight with our custom molded lip for a perfect seal to the airbox.
The AWE S-FLO Intake includes the AWE S-FLO Intake hose, S-FLO Filter, and all required hardware for installation.
The S-FLO Filter
The S-FLO Filter is the largest filter that can fit within the factory air-box, and also our bespoke filter of choice for all 3.0T / 3.2L S-FLO packages. The AWE S-FLO Filter is a proprietary, washable, dry media, large cylindrical filter that has been tested to allow up to 34% more airflow than the factory paper filter.
The AWE S-FLO Filter includes:
The entirety of the 3.0T / 3.2L S-FLO lineup was designed and tested on AWE in-house vehicles, and are cost-effective, incredibly attractive upgrades to bring the power!
Below are dyno comparison tests performed on our Mustang MD-500-SE AWD dynamometer. All tests were performed using our B8 S4 6speed, with controlled ambient conditions.
Crankshaft Horsepower Gains for the AWE Tuning 3.0T S-FLO Intake
Wheel Horsepower Gains for the AWE Tuning 3.0T S-FLO Intake
(Above) Adding the AWE Tuning 3.0T S-FLO Intake results in substantial power gains over the factory system. Gains of +9 wheel hp and +5 wheel tq were made using stock software. This results in gains of +10 crank hp and +6 crank tq. Maximum gains of +15 crank hp and +11 crank tq are seen at 7000 rpm.
Pressure Drop Testing for the AWE Tuning 3.0T S-FLO Intake
(Above) shows the pressure drop of the AWE Tuning 3.0T S-FLO Intake (one using just the S-FLO filter, the other using the complete system) vs. the factory air box and filter. Less restriction is represented by a pressure drop close to zero. It can be seen that the S-FLO filter is less restrictive than the stock filter and the AWE Tuning 3.0T S-FLO Intake system is far less restrictive than the factory air box and filter.
Flow Bench Testing for the AWE Tuning 3.0T S-Filter
(Above) Is data from flow bench testing of the AWE Tuning ® S-FLO filter in comparison to the stock filter. It can be seen that our S-FLO filter is capable of flowing 330.3 cubic feet per minute (CFM) compared to the stock filter’s 246.7 CFM in almost identical conditions. This increase in flows results in an increase in power.
The AWE No CEL (Check Engine Light) Guarantee is noted on certain AWE products, and offers peace of mind against the appearance of Check Engine Lights when products are installed properly and used as intended, on vehicles with no additional modifications, with the exception of other AWE products intended to work with the product in question.
Install Guide:
Warranty:
