1. Let vehicle shut down for 5 minutes.
2. Locate gas pedal assembly plug.
3. Disconnect assembly plug.
4. Plug connectors into their coordinating plugs on the gas pedal.
5. Tuck cables in place so they do not affect or endanger your driving.
6. Route the Pedal Commander to where you may easily access it.
7. Use the alcohol wipe to clean the area you want to mount it.
8. Apply the velcro to the bracket and the cleaned area.
9. Insert the Pedal Commander into the bracket and you have completed the installation process.

If you unplug the gas pedal without allowing the vehicles ECU to completely power off you will receive a check engine light when you start the vehicle.

Please allow a minimum of 5 minutes to allow the ECU to fully turn off before installing.

PEDAL COMMANDER SETTINGS

Stock: When all the Pedal Commander lights are off your vehicle is operating using the stock throttle settings.

ECO Mode: Used for fuel savings, smoother driving, better traction control in heavy weather conditions or for Off-Roading purposes.

Press and hold the Program for 3 seconds to enter ECO Mode.

CITY Mode: Perfect for daily driving

SPORT Mode: Spirited Driving

SPORT+ Mode: Great for racing at the track or performance driving.

**Pedal Commander will not be active while using cruise control.**

General Disclaimer:

Pedal Commander is intended to increase your vehicles throttle performance, including its speed and acceleration capabilities. We hope that all drivers practice RESPONSIBLE safe driving skills while using the Pedal Commander. As the manufacture we are not responsible for the misuse of our product or the drivers who may operate their vehicles in an unsafe or illegal manor.