Compatible: (5.7L/6.1L/6.4L)
2005 - 2023 Chrysler 300
2008 - 2023 Dodge Challenger
2006 - 2023 Dodge Charger
2005 - 2023 Dodge Durango
2005 - 2008 Dodge Magnum
2003 - 2010 Dodge Ram 1500/2500/3500
2011 - 2023 RAM 1500
2011 - 2023 RAM 2500
2011 - 2023 RAM 3500
2005 - 2023 Jeep Grand Cherokee
This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles.
The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles:
- 1965 and older U.S. manufactured California Certified vehicles
- 1967 and older U.S. manufactured Federally Certified vehicles
- 1967 and older Foreign manufactured vehicle
Add even more power to your Gen III Hemi engine with a Holley Hi-Ram intake manifold. This cast intake manifold has large intake ports - fits 2009-up 5.7L, 2005-2010 6.1L & 2011-up 6.4L engines. The Holley Hi-Ram intake manifold is for high-performance applications where induction system height is not limited. Using this Hi-Ram intake with high flowing Gen III Hemi cylinder heads has outstanding potential for naturally aspirated & forced induction applications. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! The base is designed to be modular in configuration to accept a wide range of EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations. The EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7 to 7.2+ liter range, max power at 7500-8500 RPM.
Features:
- Add Even More Power to the Gen III Hemi Engine with a Holley Hi-Ram Intake Manifold
- Fits Gen III Hemi Engines w/ Large Intake Ports (1.70” Height x 1.88” Wide) – fits 2009-up 5.7L, 2005-2010 6.1L, 2011-up 6.4L)
- Cast Aluminum Construction w/ Natural Satin or Black Finish
- Runner Length and the Tapered Cross Section Designed to Perform Well for a Wide Range of Engine Configurations
- Includes EFI Fuel Rails w/ -8 AN O-Ring Fittings & Large Passages to Accommodate High Fuel Flow and Dampen Pressure Pulsations in the Fuel System
- Works with Gen III Hemi Injectors & Bosch EV-1 Style Injectors
- O-Ring Seal to Head – Large Retained O-rings Offer Superior Original Equipment (OE) Style Sealing & Are Easy to Replace
- Billet Oil Fill Cap – Attractive Low Profile Design
- Positive Crankcase Ventilation (PVC) Ports w/ Adapter Fittings
- Overall Height: 11.59”
- Port for OE Style Manifold Absolute Pressure (MAP) Sensor (1 or 2 Bar)
- Cast-In Pads for Adding Nitrous Nozzles
- Manifold Base – Available Separately for Custom Induction Systems
Brand | Holley EFI |
---|---|
Color | Natural |
Construction | Cast |
Emission Code | 3 |
Engine | GEN 3 HEMI |
Finish | Satin |
Flange Style | EFI |
Front Height | 11.59 inch |
Fuel System Type | EFI |
Injector Style Provision | EV-1 |
Gen III Hemi | |
Inlet Size | 95mm |
Manifold Type | Hi-Ram |
Material | Aluminum |
Port Size | 1.70" x 1.88" |
Product Type | Intake Manifold |
Rear Height | 10.35 inch |
RPM Power Band | 1500-7000 |
Runner Length | 6.65 inch |
Style | EFI |
Throttle Bore | 95mm |
Type of Component | Intake Manifold |
Vacuum Ports | (2) 3/8" NPT & (1) 1/4" NPT |
Warranty | Limited 90 Day |
UPC | 090127101568 |
Part Number | 300-650 |
Install Guide:
Warranty: