Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455
Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455

EDE2152

Edelbrock Perf Plus Cam and Lifters Kit Olds 400-455

Regular price$377.95
/
Shipping calculated at checkout.
  • Question? Call us at (888) 257-1077 🏁
  • info@10SecondRacing.com
  • Free Shipping to Lower 48 US States ($100+)
  • Worldwide Shipping via UPS (Check Rates at Checkout)
  • This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

    Edelbrock Performer-Plus Camshaft #2152 is designed for 400-425-455 Oldsmobile V8 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2152 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 445 Ft Lbs of Torque when paired with Performer Olds 455 intake manifold #2151 and stock cylinder heads. Will not fit Toronados or 1966 and earlier. Fits 1967-84 400-425-455, 39 Degree bank angle engine. Camshaft specifications: - Intake duration: 214 Degrees - Exhaust duration: 224 Degrees - Intake lift: .472" - Exhaust lift: .496" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 15"
    Installation Instructions
    Warranty
    Installation Instructions


    This Part Fits:

    Year Make Model Submodel
    1976 Buick Electra 225
    1975 Buick Electra Custom
    1975-1976 Buick Electra Limited
    1975-1976 Buick Estate Wagon Base
    1975 Buick LeSabre Base
    1975-1976 Buick LeSabre Custom
    1975-1976 Buick Riviera Base
    1975 Buick Riviera GS
    1976 Buick Riviera Sport
    1976 Buick Riviera SR
    1973-1974 GMC Transmode Base
    1967-1971 Oldsmobile 442 Base
    1967-1974 Oldsmobile 98 Base
    1967 Oldsmobile 98 Holiday
    1975-1976 Oldsmobile 98 Luxury
    1973-1976 Oldsmobile 98 Regency
    1971-1976 Oldsmobile Custom Cruiser Base
    1975-1976 Oldsmobile Custom Cruiser Panel
    1975 Oldsmobile Cutlass 442
    1967-1968,1970-1975 Oldsmobile Cutlass Base
    1976 Oldsmobile Cutlass Colonnade S
    1972 Oldsmobile Cutlass Cruiser
    1967 Oldsmobile Cutlass Holiday
    1971-1976 Oldsmobile Cutlass S
    1967 Oldsmobile Cutlass Turnpike Cruiser
    1976 Oldsmobile Cutlass Vista Cruiser
    1975-1976 Oldsmobile Cutlass Salon Base
    1971-1976 Oldsmobile Cutlass Supreme Base
    1976 Oldsmobile Cutlass Supreme Colonnade
    1974-1975 Oldsmobile Cutlass Supreme Cruiser
    1976 Oldsmobile Cutlass Tiara Base
    1967-1968 Oldsmobile Delmont 88 Base
    1967 Oldsmobile Delmont 88 Holiday
    1967-1976 Oldsmobile Delta 88 Base
    1967-1971 Oldsmobile Delta 88 Custom
    1967 Oldsmobile Delta 88 Holiday
    1969-1976 Oldsmobile Delta 88 Royale
    1970,1972 Oldsmobile F85 Base
    1968-1975 Oldsmobile Vista Cruiser Base