Dinan®  D780-0001A  High Performance Heat Exchanger
Dinan®  D780-0001A  High Performance Heat Exchanger
Dinan®  D780-0001A  High Performance Heat Exchanger
Dinan®  D780-0001A  High Performance Heat Exchanger
Dinan®  D780-0001A  High Performance Heat Exchanger
Dinan®  D780-0001A  High Performance Heat Exchanger
Dinan®  D780-0001A  High Performance Heat Exchanger

D780-0001A

Dinan® (14-23) BMW M2/M3/M4 Performance Heat Exchanger

Regular price£609.07
/
Shipping calculated at checkout.
  • In stock, ready to ship
  • THIS PRODUCT IS NOT CARB CERTIFIED
  • Question? Call us at (888) 257-1077 🏁
  • Free Shipping USA (Exc. HI, AK, PR)

Compatible: (3.0L)

2015 - 2022 BMW M2

2014 - 2019 BMW M3 

2014 - 2020 BMW M4

  

Heat is the enemy of performance. Keep temps down and performance will go up as a result of increased efficiency. It's really as simple as that. In stock trim, testing made it painfully obvious that cooling was going to hold an even more vital role on the F8x (S55) platform to achieve maximum results. The stock cooling system heat soaks after only 3 pulls and allows the engine air intake temperatures (IAT) to rise dangerously. The ECU must then reduce engine power to prevent detonation. With the Dinan high-performance heat exchanger the vehicle does not heat soak even after 7 pulls; more than twice the effectiveness of a stock setup! Some may ask why change the heat exchanger and not the intercooler itself? Wouldn't it be more beneficial to go directly to the source of the charge air? The simple answer is yes, but at a cost. The stock system cools the intake charge by using a water-to-air intercooler, an expensive piece to engineer. The cooling circuit for the water that feeds the intercooler uses a primary cooler (heat exchanger) and a smaller secondary cooler in front of the passenger side wheel. Through rigorous testing of all 3 of those components and multiple combinations therein, it was discovered that the most effective performance per dollar solution was replacing the heat exchanger with a larger unit. Further testing focused on the heat exchanger produced the optimized design you see before you. With 60% more volume and 19% more face area than stock along with being a whopping 40mm thick (stock is 24mm), it becomes quickly apparent how heat soak is averted with the improved setup. While the unit could be physically thicker the 40mm dimension was ultimately chosen with consideration of airflow requirements of the main radiator which is located directly behind the heat exchanger. A thicker core would diminish airflow and sacrifice normal engine cooling which would be potentially detrimental to the long term health of the engine. The increased physical stature of the heat exchanger allows a reduction in water temperatures to the intercooler an average of 9° across the RPM range. The colder water entering the intercooler then improves is efficiency and allows the intake air to be cooled by an additional 6° average across the RPM range compared to the stock unit. The reduction in intake air results in an impressive 10 HP and 20 ft-lb of torque gain without any changes in the engine tune. The cooling unlocks some significant additional power when paired with the stage 3 DINANTRONICS Performance Tuner (where applicable).


Features:

  • More Power: Consistent +10 HP / +20 LB-FT of torque on the stock engine tune
  • 60% more core volume & 19% more face area than stock
  • 40mm thick Dinan cooler vs. 24mm thick stock cooler
  • 9° average water termperature reduction to the intercooler across the RPM range. Colder water improves intercooler efficiency and allows the intake air to be cooled by an additional 6° average across the RPM range compared to stock
  • Significant reduction in tendency to heat soak
  • Rubber mounted for vibration isolation
  • Track tested to ensure consistent performance under extreme conditions




Install Guide:

 

Warranty:

 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Based on 11 reviews
64%
(7)
9%
(1)
9%
(1)
9%
(1)
9%
(1)
A
aFe® (99-07) GM SUV/Truck Magnum FORCE Stage-2 Cold Air Intake System
Alexandru P. (Portland, Oregon, United States)
It works great

The product works good I'm happy with my purchase

M
aFe® (11-23) Mopar SRT Momentum™ GT Air Intake System
Matthew G. (Van Nuys, California, United States)
Cold air intake

Very easy install with the cold air intake, and the power is definitely noticeable.

L
Katech® GM LSX Billet Belt Tensioner
Lou W. (Chandler, Arizona, United States)
Awesome product

Solved my belt slipping problem on high rpm track car. Thank you!

M
CompCams® (09-23) Mopar V8 Stage 2 HRT 220/230 Max Power Hydraulic Roller Master Cam Kit
Maximum_steelrt (Washington, District of Columbia, United States)
2017 Dodge Charger rt

Was the best upgrade I’ve done so far made it feel like a new engine and sounds amazing and definitely pulls a lot harder

J
Carbon Creations® (08-23) Challenger Redeye Style Rear Spoiler
John (Jersey City, New Jersey, United States)
Great Product!

Easy install and woke up my car!

Worth every penny

Works as described. I like the cruise control operation. Easy to go from fun to work mode.

E
10 Second Racing® Window Decal
ERIC D. (Atlanta, Georgia, United States)
AWESOME PRODUCT!!

It's great!!

S
Toyo® Proxes R888R DOT Competition Tire
Scargod (New Haven, Connecticut, United States)
Noisy and not sticky enough when pushed

I have run quite a few Hoosier R7's but wanted the size available in the 888R's for my new BRZ. For one thing, I had forgotten how noisy they are! I could live with that if they performed better on a dry track.
When pushed hard for 20+ minutes they eventually build up enough heat to start getting greasy and losing grip.
For many they will be adequate for track days, but I drive my cars too close to the limit. A better tire for me in the dry has been the Eagle Supercar F1 3R's.

J
RIPP® (05-23) Mopar V8 Performance Ignition Coil Packs
Jason g. (Melbourne, Victoria, Australia)
Haven't received them yet

As above

Not a fit

Unfortunately the belt did not fit, it was was too long, my fruend had a 2018 SRT, he had the same problem with his order.
The transaction process was easy, the belt seems like good quality, too bad it didn't fit

M
BBK® (16-23) Camaro SS Power-Plus Series® Cold Air Intake System
Mahari H. (El Cerrito, California, United States)

BBK® (16-23) Camaro SS Power-Plus Series® Cold Air Intake System