{"title":"Milltek®","description":"","products":[{"product_id":"milltek®-15-23-dodge-challenger-srt-hellcat-304ss-3-cat-back-exhaust-with-front-pipe-back-with-active-h-system","title":"Milltek® (15-23) Dodge Challenger SRT Hellcat 304SS 3\" Cat-Back Exhaust with Front Pipe-Back with Active H System","description":"\u003ch2\u003eCOMPATIBLE: (6.2L - SC)\u003c\/h2\u003e\n\u003ch2\u003e2015 - 2023 DODGE CHALLENGER SRT HELLCAT \u003c\/h2\u003e\n\u003ch3\u003eOur range of systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished","offer_id":41556133085278,"sku":"SSXDOD101","price":3638.0,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":41556133118046,"sku":"SSXDOD102","price":3746.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41556133150814,"sku":"SSXDOD104","price":4346.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41556133183582,"sku":"SSXDOD103","price":4226.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot_2025-03-10_at_2.22.37_PM.png?v=1741631613"},{"product_id":"milltek®-16-24-camaro-ss-lt1-304ss-3-valved-cat-back-exhaust-with-unbalanced-straight-center","title":"Milltek® (16-24) Camaro SS\/LT1 304SS 3\" Valved Cat-Back Exhaust with Unbalanced Straight Center","description":"\u003ch1\u003eCOMPATIBLE: (6.2L - LT1)\u003c\/h1\u003e\n\u003ch1\u003e2020 - 2024 CHEVROLET CAMARO LT1 \u003c\/h1\u003e\n\u003ch1\u003e2016 - 2024 CHEVROLET CAMARO SS\u003c\/h1\u003e\n\u003ch2\u003eOur range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h2\u003e\n\u003ch2\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished 304SS","offer_id":41556201209950,"sku":"SSXCH105","price":3388.0,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":41556201242718,"sku":"SSXCH106","price":3492.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41556201275486,"sku":"SSXCH104","price":4052.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41556201308254,"sku":"SSXCH109","price":4132.0,"currency_code":"USD","in_stock":true},{"title":"Carbon Fibre","offer_id":41556201341022,"sku":"SSXCH108","price":4256.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-03-10at2.45.31PM.png?v=1741633326"},{"product_id":"milltek®-16-24-camaro-ss-lt1-304ss-3-valved-cat-back-exhaust-with-h-pipe-system","title":"Milltek® (16-24) Camaro SS\/LT1 304SS 3\" Valved Cat-Back Exhaust with H-Pipe System","description":"\u003ch1\u003eCOMPATIBLE: (6.2L - LT1)\u003c\/h1\u003e\n\u003ch1\u003e2020 - 2024 CHEVROLET CAMARO LT1 \u003c\/h1\u003e\n\u003ch1\u003e2016 - 2024 CHEVROLET CAMARO SS\u003c\/h1\u003e\n\u003ch2\u003eOur range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h2\u003e\n\u003ch2\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished 304SS","offer_id":41556350763102,"sku":"SSXCH100","price":3388.0,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":41556350795870,"sku":"SSXCH101","price":3492.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41556350828638,"sku":"SSXCH102","price":4052.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41556350861406,"sku":"SSXCH103","price":4132.0,"currency_code":"USD","in_stock":true},{"title":"Carbon Fiber","offer_id":41556350894174,"sku":"SSXCH104","price":4256.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-03-10at3.47.30PM.png?v=1741636072"},{"product_id":"milltek®-20-25-corvette-c8-stingray-304ss-3-cat-back-exhaust-with-4-5-od-tips","title":"Milltek® (20-25) Corvette C8 Stingray 304SS 3\" Cat-Back Exhaust with 4.5\" OD Tips","description":"\u003ch2\u003eCOMPATIBLE: (LT2 - 6.2L)\u003c\/h2\u003e\n\u003ch2\u003e2020 - 2025 CHEVROLET CORVETTE STNGRAY C8 \u003c\/h2\u003e\n\u003ch2\u003e2020 - 2025 CHEVROLET CORVETTE E-RAY C8\u003c\/h2\u003e\n\u003ch2\u003eOur range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h2\u003e\n\u003ch2\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished 304SS","offer_id":41556371472478,"sku":"SSXCH001","price":3471.0,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":41556371505246,"sku":"SSXCH002","price":3598.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Blue Titanium","offer_id":41556371538014,"sku":"SSXCH004","price":3965.4,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41556371570782,"sku":"SSXCH003","price":3851.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/6_965c4d51-bda6-4548-9798-969e8fdbf5e9.jpg?v=1741638677"},{"product_id":"milltek®-20-25-corvette-c8-hjs-hi-flo-sport-catted-catalytic-converters","title":"Milltek® (20-25) Corvette C8 HJS Hi-Flo Sport Catted Catalytic Converters","description":"\u003ch2\u003eCOMPATIBLE: (6.2L)\u003c\/h2\u003e\n\u003ch2\u003e2020 - 2025 CHEVROLET CORVETTE STNGRAY C8 \u003c\/h2\u003e\n\u003ch2\u003e2020 - 2025 CHEVROLET CORVETTE E-RAY C8\u003c\/h2\u003e\n\u003ch2\u003e2023 - 2025 CHEVROLET CORVETTE Z06 C8\u003c\/h2\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cspan\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency. Used with our Catalyst Bypass Pipe, you can expect significant power-gain without any restriction on gas-flow made by a catalyst.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Include","offer_id":41556421476446,"sku":"SSXCH111","price":3104.0,"currency_code":"USD","in_stock":true},{"title":"Exclude","offer_id":41556421509214,"sku":"SSXCH110","price":2793.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-03-10at4.50.59PM.png?v=1741639890"},{"product_id":"milltek®-ford-mustang-ecoboost-s650-304ss-3-valved-resonated-cat-back-exhaust-with-quad-4-od-tips","title":"Milltek® Ford Mustang EcoBoost S650 304SS 3\" Valved\/Resonated Cat-Back Exhaust with Quad 4\" OD Tips","description":"\u003ch1\u003eCOMPATIBLE: (2.3L - ECOBOOST)\u003c\/h1\u003e\n\u003ch1\u003e2024 - 2026 FORD MUSTANG ECOBOOST\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished 304SS","offer_id":41556577091678,"sku":"SSXFD434","price":3137.0,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":41556577124446,"sku":"SSXFD435","price":3357.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41556577157214,"sku":"SSXFD436","price":3517.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41556577189982,"sku":"SSXFD437","price":3917.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-03-10at5.06.15PM.png?v=1741640820"},{"product_id":"milltek®-24-26-mustang-fastback-s650-active-valved-cat-back-exhaust-with-h-pipe","title":"Milltek® Ford Mustang MACH 1\/Dark Horse Active Valved Non-Resonated Cat-Back Exhaust with H-Pipe","description":"\u003ch2\u003eCOMPATIBLE: (5.0L - COYOTE)\u003c\/h2\u003e\n\u003ch2\u003e2015 - 2023 FORD MUSTANG MACH 1 S550\u003c\/h2\u003e\n\u003ch2\u003e2024 - 2026 FORD MUSTANG DARK HORSE S650 \u003c\/h2\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eOur range of systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished","offer_id":41659638841438,"sku":"SSXFD420","price":2789.0,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":41659638874206,"sku":"SSXFD422","price":3429.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41659638906974,"sku":"SSXFD421","price":2889.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41659638939742,"sku":"SSXFD423","price":3629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/4_42155cd6-8b4a-4e89-92af-ace15838f815.jpg?v=1745888780"},{"product_id":"milltek®-ford-mustang-mach-1-dark-horse-active-valved-non-resonated-cat-back-exhaust-with-x-pipe","title":"Milltek® Ford Mustang MACH 1\/Dark Horse Active Valved Non-Resonated Cat-Back Exhaust with X-Pipe","description":"\u003ch2\u003eCOMPATIBLE: (5.0L - COYOTE)\u003c\/h2\u003e\n\u003ch2\u003e2015 - 2023 FORD MUSTANG MACH 1 S550\u003c\/h2\u003e\n\u003ch2\u003e2024 - 2026 FORD MUSTANG DARK HORSE S650 \u003c\/h2\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eOur range of systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished","offer_id":41659661058142,"sku":"SSXFD420","price":2789.0,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":41659661090910,"sku":"SSXFD421","price":2889.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41659661123678,"sku":"SSXFD422","price":3429.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41659661156446,"sku":"SSXFD423","price":3629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/1_8f32076f-7740-408c-bb08-aa5f8454b4f4.jpg?v=1745887989"},{"product_id":"milltek®-24-26-mustang-gt-s650-active-valved-cat-back-exhaust-with-h-pipe","title":"Milltek® (24-26) Mustang GT S650 Active Valved Cat-Back Exhaust with H-Pipe","description":"\u003ch1\u003eCOMPATIBLE: (5.0L - COYOTE)\u003c\/h1\u003e\n\u003ch1\u003e2024 - 2026 FORD MUSTANG GT S650\u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eOur range of systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished","offer_id":41659711619166,"sku":"SSXFD429","price":2689.0,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":41659711651934,"sku":"SSXFD430","price":2789.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41659711684702,"sku":"SSXFD431","price":3429.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41659711717470,"sku":"SSXFD432","price":3629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-28at6.03.56PM.png?v=1745888647"},{"product_id":"milltek®-24-26-mustang-gt-s650-active-valved-cat-back-exhaust-with-x-pipe","title":"Milltek® (24-26) Mustang GT S650 Active Valved Cat-Back Exhaust with X-Pipe","description":"\u003ch1\u003eCOMPATIBLE: (5.0L - COYOTE)\u003c\/h1\u003e\n\u003ch1\u003e2024 - 2026 FORD MUSTANG GT S650\u003c\/h1\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eOur range of systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished","offer_id":41659735146590,"sku":"SSXFD425","price":2733.0,"currency_code":"USD","in_stock":true},{"title":"Black Cerakote","offer_id":41659735179358,"sku":"SSXFD426","price":2833.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41659735212126,"sku":"SSXFD427","price":3213.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41659735244894,"sku":"SSXFD428","price":3513.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/4_c909f02c-68dc-4d34-8cb6-b61bbc52fab2.jpg?v=1745889234"},{"product_id":"milltek®-15-26-ford-mustang-ecoboost-fastback-valved-resonated-cat-back-exhaust","title":"Milltek® (15-26) Ford Mustang EcoBoost Fastback Valved Resonated Cat-Back Exhaust","description":"\u003ch2\u003eCOMPATIBLE: (2.3L - ECOBOOST)\u003c\/h2\u003e\n\u003ch2\u003e2015 - 2023 FORD MUSTANG ECOBOOST S550\u003c\/h2\u003e\n\u003ch2\u003e2024 - 2026 FORD MUSTANG ECOBOOST S650\u003c\/h2\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eOur range of systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished","offer_id":41659756544094,"sku":"SSXFD434","price":3137.0,"currency_code":"USD","in_stock":true},{"title":"Black Cerakote","offer_id":41659756576862,"sku":"SSXFD435","price":3237.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41659756609630,"sku":"SSXFD436","price":3517.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41659756642398,"sku":"SSXFD437","price":3917.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/1_0f6a06a8-4072-4fec-89c1-1ea5768dde57.jpg?v=1745889707"},{"product_id":"milltek®-15-26-mustang-ecoboost-valved-non-resonated-cat-back-exhaust","title":"Milltek® (15-26) Mustang EcoBoost Valved Non-Resonated Cat-Back Exhaust","description":"\u003ch2\u003eCOMPATIBLE: (2.3L - ECOBOOST)\u003c\/h2\u003e\n\u003ch2\u003e2015 - 2023 FORD MUSTANG ECOBOOST S550\u003c\/h2\u003e\n\u003ch2\u003e2024 - 2026 FORD MUSTANG ECOBOOST S650 \u003c\/h2\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eOur range of systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished","offer_id":41659771027550,"sku":"SSXFD441","price":3017.0,"currency_code":"USD","in_stock":true},{"title":"Black Cerakote","offer_id":41659771060318,"sku":"SSXFD440","price":3117.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41659771093086,"sku":"SSXFD439","price":3397.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41659771125854,"sku":"SSXFD438","price":3797.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/1_fde9d738-b083-44c2-8bfd-4551f4cb97b3.jpg?v=1745890416"},{"product_id":"milltek®-15-26-mustang-ecoboost-fastback-non-resonated-cat-back-exhaust","title":"Milltek® (15-26) Mustang EcoBoost Fastback Non-Resonated Cat-Back Exhaust","description":"\u003ch2\u003eCOMPATIBLE: (2.3L - ECOBOOST)\u003c\/h2\u003e\n\u003ch2\u003e2015 - 2023 FORD MUSTANG ECOBOOST S550\u003c\/h2\u003e\n\u003ch2\u003e2024 - 2026 FORD MUSTANG ECOBOOST S650\u003c\/h2\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eOur range of systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished","offer_id":41659793375326,"sku":"SSXFD175","price":1889.0,"currency_code":"USD","in_stock":true},{"title":"Black Cerakote","offer_id":41659793408094,"sku":"SSXFD176","price":2009.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41659793440862,"sku":"SSXFD222","price":2225.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41659793473630,"sku":"SSXFD223","price":2437.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/7_23091c0a-ae1b-402c-8808-2dc9576dbace.jpg?v=1745891085"},{"product_id":"milltek®-15-26-mustang-ecoboost-large-bore-downpipe-with-catalyst-delete-for-milltek-cat-back","title":"Milltek® (15-26) Mustang EcoBoost Large Bore Downpipe with Catalyst Delete (For Milltek Cat-Back)","description":"\u003ch2\u003eCOMPATIBLE: (2.3L - ECOBOOST)\u003c\/h2\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e2015 - 2023 FORD MUSTANG ECOBOOST S550\u003c\/h2\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e2024 - 2026 FORD MUSTANG ECOBOOST S650\u003c\/h2\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eOur range of systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41659803107422,"sku":"SSXFD172","price":575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-28at6.55.03PM.png?v=1745891728"},{"product_id":"milltek®-15-26-mustang-ecoboost-large-bore-downpipe-with-catalyst-delete-for-oe-cat-back","title":"Milltek® (15-26) Mustang EcoBoost Large Bore Downpipe with Catalyst Delete (For OE Cat-Back)","description":"\u003ch2\u003eCOMPATIBLE: (2.3L - ECOBOOST)\u003c\/h2\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e2015 - 2023 FORD MUSTANG ECOBOOST S550\u003c\/h2\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e2024 - 2026 FORD MUSTANG ECOBOOST S650\u003c\/h2\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency. Used with our Catalyst Bypass Pipe, you can expect significant power-gain without any restriction on gas-flow made by a catalyst. - This product is intended for motorsport use only and requires Stage 2 ECU Remap.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41659808907358,"sku":"SSXFD171","price":586.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-28at7.05.58PM.png?v=1745892369"},{"product_id":"milltek®-15-26-mustang-ecoboost-large-bore-downpipe-with-hi-flow-sports-catalyst-for-oe-cat-back","title":"Milltek® (15-26) Mustang EcoBoost Large Bore Downpipe with Hi-Flow Sports Catalyst (For OE Cat-Back)","description":"\u003ch2\u003eCOMPATIBLE: (2.3L - ECOBOOST)\u003c\/h2\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e2015 - 2023 FORD MUSTANG ECOBOOST S550\u003c\/h2\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e2024 - 2026 FORD MUSTANG ECOBOOST S650\u003c\/h2\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency. Used with our Catalyst Bypass Pipe, you can expect significant power-gain without any restriction on gas-flow made by a catalyst. - This product is intended for motorsport use only and requires Stage 2 ECU Remap.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41659809923166,"sku":"SSXFD170","price":1534.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-28at7.09.29PM.png?v=1745892579"},{"product_id":"milltek®-15-26-mustang-ecoboost-large-bore-downpipe-with-hi-flow-sports-catalyst-for-milltek-cat-back","title":"Milltek® (15-26) Mustang EcoBoost Large Bore Downpipe with Hi-Flow Sports Catalyst (For Milltek Cat-Back)","description":"\u003ch2\u003eCOMPATIBLE: (2.3L - ECOBOOST)\u003c\/h2\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e2015 - 2023 FORD MUSTANG ECOBOOST S550\u003c\/h2\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e2024 - 2026 FORD MUSTANG ECOBOOST S650\u003c\/h2\u003e\n\u003ch1 style=\"text-align: center;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cem\u003eINTENDED FOR FASTBACK MODELS\u003c\/em\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch3\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency. Used with our Catalyst Bypass Pipe, you can expect significant power-gain without any restriction on gas-flow made by a catalyst. - This product is intended for motorsport use only and requires Stage 2 ECU Remap.\u003c\/h3\u003e\n\u003ch3\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h3\u003e\n\u003ch2\u003eBEFORE YOU START\u003c\/h2\u003e\n\u003ch3\u003e1. Once you have received your performance exhaust system, check all the components against the corresponding packing list.\u003cbr\u003e2. For safety purposes and ease of installation, wherever possible we recommend that you take your vehicle to a qualified installer with a vehicle lift to install your exhaust system.\u003cbr\u003e3. If you are carrying out a home install, then park your vehicle on a level surface and allow time for the vehicle and exhaust to cool down.\u003cbr\u003e4. Remember to always use axle stands \/ jack stands to support the vehicle when working underneath.\u003cbr\u003e5. Wear protective clothing, including eye shields.\u003cbr\u003e6. Disconnect the battery if working near electrical connections.\u003c\/h3\u003e\n\u003ch3\u003eREMOVING THE STOCK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e7. Spray all bolts, joints and mounts with releasing fluid, allow to penetrate for about an hour.\u003cbr\u003e8. Release all connectors or clamps on the system and then start to dismantle the system from the rear forwards. Some stock systems are installed in one piece by the vehicle manufacturer before the suspension or rear axle are installed, these systems will need to be cut to be removed.\u003cbr\u003e9. Stock systems are heavy, so make sure that you have help or can adequately support the system when it is released.\u003cbr\u003e10. Sometimes removing the rubber hangers can be difficult, removing the bracket from the body may be a better solution.\u003c\/h3\u003e\n\u003ch3\u003eINSTALLING THE MILLTEK SYSTEM\u003c\/h3\u003e\n\u003ch3\u003e11. Remove all protective packaging for your new performance exhaust system and assemble the unit on the ground, make sure that each joint has a clamp and that the rubber hangers are transferred from the stock system. Replace any worn or damaged mounts.\u003cbr\u003e12. Smear a small amount of exhaust assembly paste inside each slotted joint, this will help prevent leaks on start-up and the pipes from seizing together.\u003cbr\u003e13. Install the system, front to back without tightening any of the clamps on any of the joints.\u003cbr\u003e14. Position the system so that the hangers are ideally inclined to the front of the car by 10-15mm, these hangers will then move into their correct position when the performance exhaust system is hot and expands.\u003cbr\u003e15. Make sure that there is adequate clearance around the system, remembering that this exhaust system will expand by around 25mm when hot.\u003cbr\u003e16. When the Milltek exhaust system is in the optimum position, tighten up the clamps from the front to the back, adjusting the system as necessary. Do not over-tighten the clamps.\u003c\/h3\u003e\n\u003ch3\u003eRUNNING THE MILLTEK EXHAUST SYSTEM FOR THE FIRST TIME\u003c\/h3\u003e\n\u003ch3\u003e17. Wipe off all oil, grease and fingerprints from your Milltek exhaust system.\u003cbr\u003e18. Make sure that all covers, heatshields and brackets have been replaced.\u003cbr\u003e19. Reconnect the battery if necessary.\u003cbr\u003e20. Do not start the engine in an enclosed space, adequate ventilation is always required.\u003cbr\u003e21. Start the vehicle and allow to run at tick over until the exhaust system is warmed up.\u003cbr\u003e22. Check the system for leaks, it’s not unusual for condensation to find its way out of the joints in the warm-up phase.\u003cbr\u003e23. Take your vehicle for a test drive and allow the vehicle to reach optimum running temperatures. After test drive, re-check all the joints and clearances whilst the exhaust system is still hot and re-adjust if necessary.\u003c\/h3\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41659810545758,"sku":"SSXFD169","price":1524.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-28at7.11.58PM.png?v=1745892740"},{"product_id":"milltek®-10-18-audi-a1-volks-golf-1-4l-large-bore-downpipe-with-catalyst-delete-for-milltek-cat-back","title":"Milltek® (10-18) Audi A1\/Volks Golf 1.4L Large Bore Downpipe with Catalyst Delete (For Milltek Cat-Back)","description":"\u003ch1\u003eCOMPATIBLE: (1.4L - TFSI)\u003c\/h1\u003e\n\u003ch1\u003e2010 - 2018 AUDI A1 \u003c\/h1\u003e\n\u003ch1\u003e2010 - 2014 SKODA FABIA \u003c\/h1\u003e\n\u003ch1\u003e2008 - 2017 SEAT IBIZA\u003c\/h1\u003e\n\u003ch1\u003e2010 - 2017 VOLKSWAGEN GOLF GTI \u003c\/h1\u003e\n\u003ch2\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency. Used with our Catalyst Bypass Pipe, you can expect significant power-gain without any restriction on gas-flow made by a catalyst.\u003c\/h2\u003e\n\u003ch2\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41662452629598,"sku":"SSXAU297","price":734.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-29at6.58.17PM.png?v=1745978307"},{"product_id":"milltek®-10-18-audi-a4-non-resonated-louder-cat-back-exhaust-system","title":"Milltek® (10-18) Audi A4 Non-Resonated (Louder) Cat-Back Exhaust System","description":"\u003ch1\u003eCOMPATIBLE: (1.4L - TFSI)\u003c\/h1\u003e\n\u003ch1\u003e2010 - 2018 AUDI A4 \u003c\/h1\u003e\n\u003ch2\u003eOur range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h2\u003e\n\u003ch2\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41662454104158,"sku":"SSXAU457MP","price":987.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/1_4987edf7-ab93-4098-a81f-6e79359210f3.jpg?v=1745978632"},{"product_id":"milltek®-18-audi-sq5-large-bore-downpipe-with-catalyst-delete","title":"Milltek® (18+) Audi SQ5 Large Bore Downpipe with Catalyst Delete","description":"\u003ch1\u003eCOMPATIBLE: (3.0L - TFSI)\u003c\/h1\u003e\n\u003ch1\u003e2018 - 2026 AUDI SQ5 FY\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUsed with our Catalyst Bypass Pipe, you can expect significant power-gain without any restriction on gas-flow made by a catalyst.\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003ch2\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eFor Track Use Only!\u003c\/b\u003e\u003cbr\u003e- For Fitment with both OE and Milltek Sport Cat Back Systems\u003cbr\u003e- Requires a Stage 2 ECU remap\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41663449792606,"sku":"SSXAU762","price":879.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-30at9.25.04AM.png?v=1746030319"},{"product_id":"milltek®-18-audi-sq5-large-bore-downpipe-with-hi-flow-sports-catalyst-for-all-exhausts","title":"Milltek® (18+) Audi SQ5 Large Bore Downpipe with Hi-Flow Sports Catalyst (For All Exhausts)","description":"\u003ch1\u003eCOMPATIBLE: (3.0L - TFSI)\u003c\/h1\u003e\n\u003ch1\u003e2018 - 2026 AUDI SQ5 \u003c\/h1\u003e\n\u003ch2\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cspan\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCombined with our Hi-Flow Sports Cat, you can expect a significant increase in performance and a noticeable difference in sound aesthetic.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41663566086238,"sku":"SSXAU761","price":2276.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-30at11.44.52AM.png?v=1746038703"},{"product_id":"milltek®-18-audi-sq5-resonated-cat-back-exhaust-with-4-od-tips","title":"Milltek® (13-17) Audi SQ5 Resonated Cat-Back Exhaust with 4\" OD Tips","description":"\u003ch1\u003eCOMPATIBLE: (3.0L - TFSI)\u003c\/h1\u003e\n\u003ch1\u003e2013 - 2017 AUDI SQ5 8R\u003c\/h1\u003e\n\u003ch2\u003eOur range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and\/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions.\u003c\/h2\u003e\n\u003ch2\u003eAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research \u0026amp; development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Polished","offer_id":41663574573150,"sku":"SSXAU506","price":3234.0,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":41663574605918,"sku":"SSXAU505","price":3234.0,"currency_code":"USD","in_stock":true},{"title":"Brushed Titanium","offer_id":41663574638686,"sku":"SSXAU507","price":3626.0,"currency_code":"USD","in_stock":true},{"title":"Burnt Titanium","offer_id":41663574671454,"sku":"SSXAU670","price":4042.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot_2025-04-30_at_12.09.13_PM.png?v=1746041058"},{"product_id":"milltek®-19-26-audi-sq7-sq8-rsq8-large-bore-catless-downpipes","title":"Milltek® (19-26) Audi SQ7\/SQ8\/RSQ8 Large Bore Catless Downpipes","description":"\u003ch1\u003eCOMPATIBLE: (4.0L - BI-TURBO)\u003c\/h1\u003e\n\u003ch1\u003e2020 - 2026 AUDI SQ7 \u003c\/h1\u003e\n\u003ch1\u003e2019 - 2026 AUDI SQ8 \u003c\/h1\u003e\n\u003ch1\u003e2019 - 2026 AUDI RS Q8\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUsed with our Catalyst Bypass Pipe, you can expect significant power-gain without any restriction on gas-flow made by a catalyst.\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003ch2\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eFor Track Use Only!\u003c\/b\u003e\u003cbr\u003e- For Fitment with both OE and Milltek Sport Cat Back Systems\u003cbr\u003e- Requires a Stage 2 ECU remap\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41663636340830,"sku":"SSXAU955","price":3323.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-30at12.31.08PM.png?v=1746041478"},{"product_id":"milltek®-19-26-audi-sq7-sq8-rsq8-large-bore-hi-flo-catted-downpipes","title":"Milltek® (19-26) Audi SQ7\/SQ8\/RSQ8 Large Bore Hi-Flo Catted Downpipes","description":"\u003ch1\u003eCOMPATIBLE: (4.0L - BI-TURBO)\u003c\/h1\u003e\n\u003ch1\u003e2020 - 2026 AUDI SQ7 \u003c\/h1\u003e\n\u003ch1\u003e2019 - 2026 AUDI SQ8 \u003c\/h1\u003e\n\u003ch1\u003e2019 - 2026 AUDI RS Q8\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan\u003eMilltek Sport Large-Bore Downpipes are perfect when looking to improve both performance and sound. These downpipes are fabricated with a larger diameter than standard OEM parts, meaning that there is significantly more space for more gas to exit the engine and pass through, increasing efficiency.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eUsed with our Catalyst Bypass Pipe, you can expect significant power-gain without any restriction on gas-flow made by a catalyst.\u003c\/span\u003e\n\u003c\/h2\u003e\n\u003ch2\u003e-\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eFor Track Use Only!\u003c\/b\u003e\u003cbr\u003e- For Fitment with both OE and Milltek Sport Cat Back Systems\u003cbr\u003e- Requires a Stage 2 ECU remap\u003c\/h2\u003e\n\u003ch1\u003eABOUT MILLTEK EXHAUST\u003c\/h1\u003e\n\u003ch3\u003eAll of our performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that our products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. \u003cbr\u003e\u003cbr\u003eOur devotion to the perfection of our exhaust systems is what has enabled us to become accredited to ISO9001:2015 as well as being able to accomplish one of the widest ranges of EC Approved performance exhaust systems, all tested and approved by TUV in Germany. This, combined with our comprehensive dealer network, delivering to more than 95 countries world-wide continues to make Milltek one of the most accessible brands in the performance aftermarket industry.\u003c\/h3\u003e\n\u003ch1\u003eWARRANTY:\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/milltek%C2%AE-exhaust-product-warranty\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Milltek_logo.webp?v=1741630683\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Milltek®","offers":[{"title":"Default Title","offer_id":41663691128926,"sku":"SSXAU956","price":5311.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2025-04-30at1.52.00PM.png?v=1746046329"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/collections\/Screenshot_2025-03-10_at_4.44.07_PM.png?v=1741639679","url":"https:\/\/10secondracing.com\/collections\/milltek%c2%ae.oembed","provider":"10 Second Racing","version":"1.0","type":"link"}