{"title":"BMR Suspension®","description":"","products":[{"product_id":"bmr-suspension®-sway-bar-kit","title":"BMR Suspension® (16-24) Camaro 6th Gen Sway Bar Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe amount of force exerted on the sway bar end link is staggering—especially if you’ve upgraded to an aftermarket sway bar, like BMR Suspension's adjustable and non-adjustable 2016-newer Camaro sway bars. The stock end links are weak and can bend or break. BMR’s ELK015 front and rear end link kit allows you to push your 2016-newer Camaro to the limit without fear of end link deflection. BMR manufactures the ELK015s out of CNC-machined billet aluminum hex bar stock (front) and billet steel bar stock (rear). The ball joint-style tie rods (front) are manufactured by Proforged. Ball joints allow for great articulation, which is what you want when you hit the track. The front ball joints are greasable. The rear end links feature greasable 95-durometer polyurethane bushings. This ensures long life and flawless operation. The rod ends attach to the sway bar with 12mm studs, and connect to the sway bar with supplied hardware. This combination of components gives you a huge increase in strength over stock end links.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR designed the ELK015 front and rear sway bar end link kit for street performance, autocross, and road race applications. BMR’s heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMR’s ELK015 will not deflect, giving you the full potential of the sway bar—no matter how hard you drive. The adjustable links give you the ability to easily correct sway bar geometry and working angles on lowered Camaros, as well as cars with adjustable sway bars. The ELK015 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMR’s adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s ELK015 sway bar end links are available in a durable black anodized finish (front) and black hammertone powdercoat (rear) for long-lasting good looks. Installation time is about 2 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits all 2016-Newer Chevrolet Camaros\u003cbr\u003e- Adjustable design \u003cbr\u003e- Proforged ball joint-style tie rods\u003cbr\u003e- 12mm\/1\/2-inch studs for increased strength\u003cbr\u003e- Greasable for long life and flawless operation\u003cbr\u003e- Dramatically reduces sway bar end link deflection\u003cbr\u003e- Designed to withstand high compression loads\u003cbr\u003e- Allows for proper sway bar working angles and geometry on lowered Camaros\u003cbr\u003e- Allows for preloading of sway bars to fine-tune suspension setup\u003cbr\u003e- Designed for street performance, autocross, and road race applications\u003cbr\u003e- 2-hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e—Front\u003cbr\u003e\u003cbr\u003e- Durable black anodized finish\u003cbr\u003e- On-car adjustable\u003cbr\u003e- 6061-T6 billet aluminum construction\u003cbr\u003e- Fully CNC-machined\u003cbr\u003e\u003cbr\u003e—Rear\u003cbr\u003e- Adjustable design\u003cbr\u003e- Heavy-duty Teflon-lined rod ends\u003cbr\u003e- CNC-machined\u003cbr\u003e- Fully TIG welded\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/ELK015.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Front\/Rear \/ 3-Way Adjustable \/ Black Hammertone","offer_id":18502546391155,"sku":"SB052H","price":559.95,"currency_code":"USD","in_stock":true},{"title":"Front\/Rear \/ 3-Way Adjustable \/ Red","offer_id":18502546423923,"sku":"SB052R","price":559.95,"currency_code":"USD","in_stock":true},{"title":"Front\/Rear \/ Non-Adjustable \/ Black Hammertone","offer_id":18502546456691,"sku":"SB049H","price":559.95,"currency_code":"USD","in_stock":true},{"title":"Front\/Rear \/ Non-Adjustable \/ Red","offer_id":18502546489459,"sku":"SB049R","price":559.95,"currency_code":"USD","in_stock":true},{"title":"Front \/ 3-Way Adjustable \/ Black Hammertone","offer_id":18502546522227,"sku":"SB053H","price":269.95,"currency_code":"USD","in_stock":true},{"title":"Front \/ 3-Way Adjustable \/ Red","offer_id":18502546554995,"sku":"SB053R","price":269.95,"currency_code":"USD","in_stock":true},{"title":"Front \/ Non-Adjustable \/ Black Hammertone","offer_id":18502546587763,"sku":"SB050H","price":259.95,"currency_code":"USD","in_stock":true},{"title":"Front \/ Non-Adjustable \/ Red","offer_id":18502546620531,"sku":"SB050R","price":259.95,"currency_code":"USD","in_stock":true},{"title":"Rear \/ 3-Way Adjustable \/ Black Hammertone","offer_id":18502546653299,"sku":"SB054H","price":319.95,"currency_code":"USD","in_stock":true},{"title":"Rear \/ 3-Way Adjustable \/ Red","offer_id":18502546686067,"sku":"SB054R","price":319.95,"currency_code":"USD","in_stock":true},{"title":"Rear \/ Non-Adjustable \/ Black Hammertone","offer_id":18502546718835,"sku":"SB051H","price":299.95,"currency_code":"USD","in_stock":true},{"title":"Rear \/ Non-Adjustable \/ Red","offer_id":18502546751603,"sku":"SB051R","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/BMR.PNG?v=1585672008"},{"product_id":"bmr-suspension®-front-strut-tower-brace","title":"BMR Suspension® (16-24) Camaro SS Front Strut Tower Brace","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro SS\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eReduce chassis flex and increase handling and performance on your 2016-newer Chevrolet Camaro with a Strut Tower Brace from BMR Suspension. The Camaro chassis flexes dramatically, even with mild amounts of torque and horsepower. BMR’s Strut Tower Braces are manufactured from a mix of 1x1.5-inch rectangular steel tubing and laser-cut 3\/16-inch steel plate. This design adds loads of strength to the front frame and suspension. These Strut Tower Braces are engineered to considerably strengthen the chassis. The STB018 connects the strut mounts to reinforce unibody and suspension.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR has designed the STB018 for the street performance, drag race, and handling applications. This two-point design solidly links the front strut towers, adding strength to the entire front unibody and suspension. BMR’s STB018 Strut Tower Brace is 100% bolt-in. This means they can be easily installed with simple hand tools, and no welding is required. When performance is a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e***NOTE:Does not fit ZL1, V6, or 2.0T.***\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e***NOTE: Does not fit with MSD Atomic intake manifold.***\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s STB018 are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is less than 1 hour. Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-newer Camaro \u003cbr\u003e- Dramatically increases chassis stiffness and improves handling \u003cbr\u003e- Manufactured from 1x1.5-inch rectangular steel tubing\u003cbr\u003e- Uses 3\/16-inch steel plate\u003cbr\u003e- 100% bolt-in design\u003cbr\u003e- Designed for street performance, drag race, and handling applications\u003cbr\u003e- Proudly designed and made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/STB018.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black Hammertone","offer_id":18502639059059,"sku":"STB018H","price":169.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":18502639091827,"sku":"STB018R","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/BMR_5bcbce3e-93a2-4306-a4e5-d52b24aaea27.PNG?v=1585671994"},{"product_id":"bmr-suspension®-rear-double-adjustable-toe-rods","title":"BMR Suspension® (16-24) Camaro 6th Gen Rear Double Adjustable Toe Rods","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe width=\"600\" height=\"450\" src=\"https:\/\/www.youtube.com\/embed\/ocFs__ud2pA\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLaunching harder, reducing wheel hop, and adding cornering consistency to your 2016-newer Chevrolet Camaro is easy with on-car adjustable Toe Rods from BMR Suspension. Stock stamped steel toe rods with eccentric adjustment bolts deflect under load and change the alignment of the rear wheels. BMR’s on-car adjustable toe rods for 2015-newer Camaro (TR007) are manufactured from heavy-duty 1 1\/4-inch DOM steel tubing. TIG-welded chrome-moly tube adapters with a heavy-duty right- and left-handed threads rod ends allow for easy on-car adjustments. This design gives you a strong toe rod that greatly improves adjustability. The TR007 features zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 6061-T6 billet aluminum, custom designed rod end spacers.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the TR007 to work well in street performance, drag race, and road race applications. The stock toe rods flex under cornering loads giving you inconsistent alignment and handling characteristics. Combine this with eccentric adjustment bolts that can't handle hard launch with sticky tires, or high-horsepower applications and you’re left with poor performance. The TR007 allows you to fine-tune the rear toe settings for any form of performance driving. BMR supplies lockout plates to eliminate the factory eccentric adjustment bolts. This allows you to make all of the adjustments on the toe rod. Lockouts are used to minimize toe change and deflection from the eccentric slipping and losing adjustment. Cars with more than stock horsepower levels or soft compound tires tent to push the limits of eccentric bolts in rear suspension systems. BMR’s TR007 Toe Rods are a complete solution to eliminating dynamic toe change at any horsepower level. This is just another reason BMR’s on-car adjustable toe rods are the perfect upgrade for the enthusiast looking to improve performance at an affordable price. When performance is a must, rely on BMR Suspension! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s TR007 On-Car Adjustable Toe Rods are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2 hours. Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-newer Chevrolet Camaro\u003cbr\u003e- On-car adjustable for easy toe changes\u003cbr\u003e- TIG-welded 1 1\/4-inch DOM steel tubing\u003cbr\u003e- Heavy-duty chrome-moly tube adapter\u003cbr\u003e- Zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends\u003cbr\u003e- Billet aluminum rod end spacers\u003cbr\u003e- Rear toe lockout plates eliminate factory toe adjustment\u003cbr\u003e- Dramatically reduces toe rod flex\u003cbr\u003e- Eliminated eccentric bolt movement and deflection\u003cbr\u003e- Designed for street performance, drag race, and road race applications\u003cbr\u003e- Durable powdercoat finish\u003cbr\u003e- 2-hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/TR007.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black Hammertone","offer_id":18502649380979,"sku":"TR007H","price":419.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":18502649446515,"sku":"TR007R","price":419.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/BMR_63cae3a1-9883-4dbf-98f3-f2c61261c408.PNG?v=1602796805"},{"product_id":"bmr-suspension®-rear-non-adjustable-boxed-trailing-arms","title":"BMR Suspension® (16-24) Camaro 6th Gen Rear Non-Adjustable Boxed Trailing Arms","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe width=\"600\" height=\"450\" src=\"https:\/\/www.youtube.com\/embed\/uR57zBy6Sbo\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLaunching harder, reducing wheel hop, and adding cornering consistency to your 2016-newer Chevrolet Camaro is easy with upper trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s polyurethane, non-adjustable trailing arms for Camaros (UTCA058) are manufactured from heavy-duty 1x1.5-inch boxed steel tubing. The open end is formed from CNC laser cut, CNC formed 3\/16-inch steel plate. This design gives you a strong control arm that greatly improves performance. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR’s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the UTCA058 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The UTCA058’s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s UTCA058 non-adjustable polyurethane upper trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2 hour. Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits all 2016-newer Chevrolet Camaros \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Designed to the factory length\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- High-durometer internally fluted polyurethane greasable bushings\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- MIG-welded 1x1.5-inch boxed steel tubing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Dramatically reduces trailing arm flex\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Greatly reduces bushing deflection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Improved Performance with acceptable NVH levels\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Designed for street performance, drag race, and road race applications\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Durable powdercoat finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 2 hour installation time\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly designed in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/UTCA058.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Upper \/ Black Hammertone","offer_id":18502666682483,"sku":"UTCA058H","price":129.95,"currency_code":"USD","in_stock":true},{"title":"Upper \/ Red","offer_id":18502666715251,"sku":"UTCA058R","price":129.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Black Hammertone","offer_id":18502666748019,"sku":"TCA059H","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Red","offer_id":18502666780787,"sku":"TCA059R","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/BMR_fd0a2690-1a3f-49ac-be81-5f884a5a3256.PNG?v=1602796843"},{"product_id":"bmr-suspension®-rear-adjustable-trailing-arms","title":"BMR Suspension® (16-24) Camaro 6th Gen Rear Adjustable Trailing Arms","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe width=\"600\" height=\"450\" src=\"https:\/\/www.youtube.com\/embed\/uR57zBy6Sbo\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLaunching harder, reducing wheel hop, and adding cornering consistency to your 2016-newer Chevrolet Camaro is easy with upper trailing arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s rod ended, on-car adjustable trailing arms for Camaros (UTCA060) are manufactured from heavy-duty 1.25-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong trailing arm that eliminates deflection and greatly improves performance. The UTCA060 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performance\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the UTCA060 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The UTCA060’s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR Suspension! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s UTCA060 on-car adjustable upper trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits all 2016-newer Chevrolet Camaros \u003cbr\u003e- On-car adjustable design\u003cbr\u003e- Heavy-duty zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends\u003cbr\u003e- Built from 1.25-inch DOM steel tubing\u003cbr\u003e- TIG-welded Chrome-moly tube adapters\u003cbr\u003e- Eliminates trailing arm flex\u003cbr\u003e- Eliminates bushing deflection\u003cbr\u003e- Designed for street performance, drag race, and road race applications\u003cbr\u003e- Durable powdercoat finish\u003cbr\u003e- 1 hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/UTCA060.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Upper \/ Black Hammertone","offer_id":18502673236083,"sku":"UTCA060H","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Upper \/ Red","offer_id":18502673268851,"sku":"UTCA060R","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Black Hammertone","offer_id":18502673301619,"sku":"TCA061H","price":279.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Red","offer_id":18502673334387,"sku":"TCA061R","price":279.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/BMR_2e4f298e-96b7-4511-b34e-11935f507ec8.PNG?v=1602796680"},{"product_id":"bmr-suspension®-front-chassis-brace-cradles","title":"BMR Suspension® (16-24) Camaro 6th Gen Front Chassis Brace Cradles","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eReduce Wheelhop and cradle movement and deflection on your 2016-newer Chevrolet Camaro with Cradle Braces from BMR Suspension. Built from heavy-duty, 1 1\/2-inch DOM steel tubing, BMR’s CB008 Cradle Braces is designed to greatly reduce cradle deflection, which is one of the biggest causes of wheelhop. BMR’s CB008 attaches to the front section of the cradle and frame to strengthen the entire assembly. The brace captures the bottom side of the cradle mounts, making each front mount double sheer. This mounting style adds strength and reduces deflection. The brace also mounts to the frame, eliminating any cradle deflection caused by the factory single sheer mounts. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the CB008 Cradle Braces for any application. This 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Braces greatly reduces cradle deflection. BMR Suspension’s CB008 rear Cradle Braces is an easy and affordable way to effectively lessen wheelhop and cradle movement on your Sixth Gen Camaro. This part does not fit convertibles.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s CB008 Cradle Braces is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- 100% bolt-on design\u003cbr\u003e- No fabrication needed\u003cbr\u003e- Installs with simple hand tools\u003cbr\u003e- 1 1\/2-inch DOM steel tubing \u003cbr\u003e- Greatly reduces stock cradle deflection \u003cbr\u003e- Used factory boltholes and supplied hardware\u003cbr\u003e- Durable powdercoat finish\u003cbr\u003e- Available in black hammertone and red powdercoat\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly built in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/CB008.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black Hammerton","offer_id":18502688604275,"sku":"CB008H","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":18502688637043,"sku":"CB008R","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_cb211e33-982d-4b10-8c7d-e2b234799e55.PNG?v=1585671993"},{"product_id":"bmr-suspension®-rear-chassis-brace-cradles","title":"BMR Suspension® (16-24) Camaro 6th Gen Rear Chassis Brace Cradles","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro \u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eReduce Wheelhop and cradle movement and deflection on your 2016-newer Chevrolet Camaro with a rear Cradle Brace from BMR Suspension. Built from heavy-duty, yet lightweight 1 1\/4-inch Chrome-moly tubing, BMR’s CB009 rear Cradle Brace is designed to greatly reduce cradle deflection, which is one of the biggest causes of wheelhop. BMR’s CB009 attaches to the rear section of the cradle and frame to strengthen the entire assembly. The brace captures the bottom side of the cradle mounts, making each rear mount double sheer. This mounting style adds strength and reduces deflection. The brace also mounts to the frame, eliminating any cradle deflection caused by the factory single sheer mounts. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the CB009 rear Cradle Brace for any application. This lightweight 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Brace greatly reduces cradle deflection. BMR Suspension’s CB009 rear Cradle Brace is lightweight and affordable way to effectively lessen wheelhop and cradle movement on your Sixth Gen Camaro.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e***NOTE: This part is not compatible with ZL1 or other models equipped with Electronic differential***\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s CB009 rear Cradle Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- 100% bolt-on design\u003cbr\u003e- No fabrication needed\u003cbr\u003e- Installs with simple hand tools\u003cbr\u003e- Lightweight design\u003cbr\u003e- 1 1\/4-inch Chrome-moly tubing \u003cbr\u003e- Greatly reduces stock cradle deflection \u003cbr\u003e- Used factory boltholes and supplied hardware\u003cbr\u003e- Durable powdercoat finish\u003cbr\u003e- Available in black hammertone and red powdercoat\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly built in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/CB009.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black Hammertone","offer_id":18502691586163,"sku":"CB009H","price":229.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":18502691618931,"sku":"CB009R","price":229.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_ba605c3e-17bf-454f-b137-76997f7474ab.PNG?v=1585671998"},{"product_id":"bmr-suspension®-driveshaft-tunnel-brace","title":"BMR Suspension® (16-24) Camaro 6th Gen Driveshaft Tunnel Brace","description":"\u003cp\u003e\u003cstrong\u003eCompatible: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIncrease floor and driveshaft tunnel rigidity on your 2016 and newer Chevrolet Camaro with a Driveshaft Tunnel Brace from BMR Suspension. Built from CNC laser-cut 1\/4-inch aluminum plate, BMR’s DTB006 Driveshaft Tunnel Brace is designed to support and stiffen the factory floor and tunnel brace. This increases chassis rigidity increasing the overall feel during aggressive maneuvering. BMR’s DTB006’s Driveshaft Tunnel Brace strengthens the floor and driveshaft tunnel for increased chassis stiffness. The design reinforces key points of the floor, effectively reducing deflection when lateral loads are applied to the chassis.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the DTB006 Driveshaft Tunnel Brace for any application. This 100% bolt-on brace use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Driveshaft Tunnel Brace reduces floor and driveshaft tunnel deflection with no change in NVH. This increases steering feel and stability on both the street and track. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s DTB006 Driveshaft Tunnel Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is less than1 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s CB008 Cradle Braces is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- 100% bolt-on design\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- No fabrication needed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Installs with simple hand tools\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Manufactured from CNC-laser cut 1\/4-inch aluminum\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Weighs 1.4 pounds\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Reinforces the floor and driveshaft tunnel\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Used factory boltholes and hardware\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Works with stock and aftermarket headers and exhaust systems\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- No change in NVH\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Durable powdercoat finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Available in black hammertone and red powdercoat\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly designed in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly built in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/DTB006.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Aluminum \/ Black Hammertone","offer_id":18502699417715,"sku":"DTB006H","price":109.95,"currency_code":"USD","in_stock":true},{"title":"Aluminum \/ Red","offer_id":18502699450483,"sku":"DTB006R","price":109.95,"currency_code":"USD","in_stock":true},{"title":"Steel \/ Black Hammertone","offer_id":18502699483251,"sku":"DTB005H","price":89.95,"currency_code":"USD","in_stock":true},{"title":"Steel \/ Red","offer_id":18502699516019,"sku":"DTB005R","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_94a2d42e-d5fc-4569-8e7e-a19a49e725af.PNG?v=1585671992"},{"product_id":"bmr-suspension®-elk016-front-greasable-end-link-kit","title":"BMR Suspension® (16-24) Camaro Front Greasable End Link Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe amount of force exerted on the sway bar end link is staggering—especially if you’ve upgraded to an aftermarket sway bar, like BMR Suspension's SB050 or SB053. The stock end links are weak and can bend or break. BMR’s ELK016 end link kit allows you to push your 2016 Camaro to the limit without fear of end link deflection. BMR manufactures the ELK016s out of CNC-machined billet aluminum hex bar stock. The right and left hand threaded ball joint-style tie rods are manufactured by Proforged and offer huge advantages over other companies’ end links that use rod ends. Ball joints allow for more articulation than a rod end, which is what you want when you hit the track. BMR’s ball joints are greasable, which you won’t find on our competitor’s end links. This ensures long life and flawless operation, and they make less noise than rod ends. The ball joints attach to the sway bar with 12mm studs, while the ball joints attach to the end link tubes with ½-inch studs. This combination of components gives you a huge increase in strength over stock end links.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR designed the ELK016 sway bar end link kit for street performance, autocross, and road race applications. BMR’s heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMR’s ELK016 will not deflect, giving you the full potential of the sway bar—no matter how hard you drive. The adjustable links allow for on-car adjustability, giving you the ability to easily correct sway bar geometry and working angles on lowered Camaros, as well as cars with adjustable sway bars. The ELK016 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMR’s adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s ELK016 sway bar end links are available in a durable black anodized finish for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits all 2016-Newer Chevrolet Camaros\u003cbr\u003e- On-car adjustable\u003cbr\u003e- Proforged ball joint-style tie rods\u003cbr\u003e- Greasable for long life and flawless operation\u003cbr\u003e- 12mm\/1\/2-inch studs for increased strength\u003cbr\u003e- 6061-T6 billet aluminum construction\u003cbr\u003e- Fully CNC-machined\u003cbr\u003e- Dramatically reduces sway bar end link deflection\u003cbr\u003e- Designed to withstand high compression loads\u003cbr\u003e- Allows for proper sway bar working angles and geometry on lowered Camaros\u003cbr\u003e- Allows for preloading of sway bars to fine-tune suspension setup\u003cbr\u003e- Designed for street performance, autocross, and road race applications\u003cbr\u003e- Durable black anodized finish\u003cbr\u003e- 1-hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/ELK016.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18502703710323,"sku":"ELK016","price":209.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_f5079924-eb63-494d-871d-63acdf3f7589.PNG?v=1585672017"},{"product_id":"bmr-suspension®-rear-adjustable-sway-bar-end-link-kit","title":"BMR Suspension® (16-24) Camaro 6th Gen Rear Adjustable Sway Bar End Link Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe amount of force exerted on the sway bar end link is staggering—especially if you’ve upgraded to an aftermarket sway bar, like BMR Suspension's SB051 or SB054. The stock end links are weak and can bend or break. BMR’s ELK017 end link kit allows you to push your 2016-newer Camaro to the limit without fear of end link deflection. BMR’s ELK017s are CNC-machined from billet steel bar stock. They feature greasable 95-durometer polyurethane bushings. This ensures long life and flawless operation. The rod ends attach to the sway bar with 12mm studs, and connect to the sway bar with supplied hardware. This combination of components gives you a huge increase in strength over stock end links.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR designed the ELK017 sway bar end link kit for street performance, autocross, and road race applications. BMR’s heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMR’s ELK017 will not deflect, giving you the full potential of the sway bar—no matter how hard you drive. The adjustable links give you the ability to easily correct sway bar geometry and working angles on lowered Camaros, as well as cars with adjustable sway bars. The ELK017 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMR’s adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s ELK017 sway bar end links are available in a black hammertone or red powdercoat finish for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits all 2016-Newer Chevrolet Camaros\u003cbr\u003e- Adjustable design\u003cbr\u003e- Heavy-duty Teflon-lined rod ends\u003cbr\u003e- CNC-machined\u003cbr\u003e- Fully TIG welded\u003cbr\u003e- Dramatically reduces sway bar end link deflection\u003cbr\u003e- Designed to withstand high compression loads\u003cbr\u003e- Allows for proper sway bar working angles and geometry on lowered Camaros\u003cbr\u003e- Allows for preloading of sway bars to fine-tune suspension setup\u003cbr\u003e- Designed for street performance, autocross, and road race applications\u003cbr\u003e- Durable powdercoat finish\u003cbr\u003e- 1-hour installation time\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/ELK017.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black Hammertone","offer_id":18502704431219,"sku":"ELK017H","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":18502704463987,"sku":"ELK017R","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_16ae466c-8874-45c2-98df-f39cad42e2d9.PNG?v=1585671996"},{"product_id":"bmr-suspension®-rear-control-arms-bearing-kit","title":"BMR Suspension® (16-24) Camaro 6th Gen Rear Control Arms Bearing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMinimize wheelhop and enhance the rear stability of your 2016 and newer Chevrolet Camaro by eliminating rear lower control arm bushing deflection with a set of Lower Control Arm Spherical Bearings from BMR Suspension. The stock rubber bushings are great for absorbing NVH, but do little for performance. The spherical bearings in BMR’s rear Lower Control Arm Spherical Bearing Kit simply eliminate bushing deflection, transferring power instead of absorbing it. BMR Suspension’s rear Lower Control Arm Spherical Bushings (BK067) drastically decreases lower control arm movement by eliminating deflection of the factory rubber bushings. BMR uses heavy-duty 3\/4-inch spherical bearings in machined bearing cups to replace the factory rubber bushings. The cup and bearing press into the rear spindle. CNC-machined billet aluminum spacers complete the assembly. This allows for a perfect fit and increased performance for any driving style.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for street performance, drag race, and handling applications, BMR Suspension BK067 Lower Control Arm Spherical Bushing Kit is the perfect wheelhop solution for any sixth gen Camaros being used for performance driving. BMR’s Lower Control Arm Spherical Bushings Kit offers huge increases in performance over the stock rubber lower control arm bushings. The OE bushings are designed with air pockets and are made from soft rubber. These “voids”, coupled with soft material produce excessive lower control arm movement during normal and aggressive driving. BMR’s Lower Control Arm Spherical Bushings kit installs in place of the OE rubber bushing, nearly eliminating lower control arm movement by solidly linking the lower control arm to the rear spindle. This eliminates almost all lower control arm bushing movement, reducing wheelhop and increases handling stability, while giving you a much improved overall feel in any performance driving situation. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s BK067 Lower Control Arm Spherical Bearings are available in a durable black finish. Installation time is about 2-3 hours. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-Newer Chevrolet Camaro \u003cbr\u003e- Designed for street performance, drag race, and handling applications\u003cbr\u003e- Replaces the factory lower control arm bushings (inner)\u003cbr\u003e- Heavy-duty 3\/4-inch spherical bearings\u003cbr\u003e- Machined bearing cups\u003cbr\u003e- CNC-machined billet aluminum spacers\u003cbr\u003e- Eliminates rear lower control arm bushings deflection\u003cbr\u003e- Decreases wheelhop\u003cbr\u003e- Increases throttle response\u003cbr\u003e- Increases traction\u003cbr\u003e- Reduces rear spindle rotation\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/BK067.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Lower Inner","offer_id":18502707380339,"sku":"BK067","price":159.95,"currency_code":"USD","in_stock":true},{"title":"Upper Outer","offer_id":18502707413107,"sku":"BK069","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_4b25e7c7-3a47-4213-a918-794502af55cd.PNG?v=1585672000"},{"product_id":"bmr-suspension®-delrin-rear-cradle-bushing-kit","title":"BMR Suspension® (16-24) Camaro 6th Gen Delrin Rear Cradle Bushing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEliminate rear cradle movement in your 2016-newer Chevrolet Camaro with a Delrin Rear Cradle Bushing Kit from BMR Suspension. The OE bushings are designed with air pockets and are made from soft rubber. These “voids”, coupled with soft material produce excessive differential movement during normal and aggressive driving. These bushings are CNC-machined from Delrin, which is known for its high stiffness, low friction and excellent dimensional stability. This material eliminates deflection with only moderate increases in NVH. Each bushing is machined to exact tolerances, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style. The BMR Delrin Rear Cradle Bushing Kit (BK062) greatly increases the rigidity and stability of the chassis to provide maximum control and consistency necessary for any form of competition or high performance street driving.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for max effort street performance, drag race, and handling applications, BMR Suspension BK062 Delrin Cradle Bushings are the perfect wheelhop solution for any Sixth Gen Camaro where NVH is not a concern. BMR’s Delrin cradle bushings replace the entire OE rubber bushing, eliminating differential movement by replacing the soft rubber OE bushings with solid two-piece Delrin bushings. These bushings remove all movement between the rear cradle and chassis, eliminating the deflection that occurs during acceleration, cornering, and braking. This reduces wheelhop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s BK062 Differential Busing Kit is available in black. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-newer Chevrolet Camaro\u003cbr\u003e- Designed for max effort street performance, drag race, and handling applications\u003cbr\u003e- Delrin cradle bushings\u003cbr\u003e- Zinc-coated inner sleeves \u003cbr\u003e- Eliminates bushing deflection\u003cbr\u003e- Greatly reduces wheelhop\u003cbr\u003e- 3-4 hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/BK062.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18502708559987,"sku":"BK062","price":619.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/BMR_624dab08-0ab4-46ce-bdef-7858876d8441.PNG?v=1585671990"},{"product_id":"bmr-suspension®-front-lower-control-arm-spherical-bearing","title":"BMR Suspension® (16-24) Camaro 6th Gen Front Lower Control Arm Spherical Bearing","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eImprove steering response and feel, and adding cornering consistency to your 2016-newer Chevrolet Camaro is easy with spherical lower control arm bearings from BMR Suspension. Soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s spherical lower control arm bearings for Sixth Gen Camaros (BK071) feature a CNC-machined bearing cup and a heavy-duty 3\/4-inch spherical bearing. This design eliminates bushing deflection, tremendously improving performance. Spherical bearings add a solid, more responsive feel over the stock rubber bushings. CNC-machined billet aluminum spacers complete the assembly. This allows for a perfect fit and increased performance for any driving style.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the BK071 to work well in street performance, drag race, and road race applications. The stock radius rod bushings flex under cornering loads giving you inconsistent handling characteristics. BMR’s lower control arm bearings eliminate deflection, giving you much improved repeatability on the street, starting line, or in the corners. This also reduces front alignment changes during aggressive cornering when high loads are applied to the chassis. BMR’s spherical bearings are designed to stand up to high loads of any performance environment. The bearings offer plenty of articulation for great handling. These are the perfect upgrade for the enthusiast looking to improve performance. When performance is a must, rely on BMR Suspension! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e***NOTE: This part is not compatible with ZL1.***\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s BK071 Front Lower Control Arm Spherical Bearing Kit is available in black. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-newer Chevrolet Camaro \u003cbr\u003e- Designed for street performance, drag race, and handling applications\u003cbr\u003e- Replaces the factory front lower control arm bushings \u003cbr\u003e- Heavy-duty 3\/4-inch spherical bearings\u003cbr\u003e- CNC-machined bearing cup\u003cbr\u003e- Eliminates front lower control arm bushing deflection\u003cbr\u003e- Decreases front alignment changes during aggressive driving\u003cbr\u003e- Increases steering feel and stability\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/BK071.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18502715736179,"sku":"BK071","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_9bcab3aa-9b1c-469c-858b-fe0d0a6da209.PNG?v=1585672016"},{"product_id":"bmr-suspension®-bk061-polyurethane-rear-cradle-bushing-kit","title":"BMR Suspension® (16-24) Camaro 6th Gen Polyurethane Rear Cradle Bushing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSignificantly reduce rear cradle movement in your Sixth Gen Camaro with a Polyurethane Rear Cradle Bushing Kit from BMR Suspension. These bushings are made from low-deflection, 95-durometer polyurethane, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking with only moderate increases in NVH. Each bushing is designed to exact tolerances, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style. The BMR Poly Rear Cradle Bushing Kit (BK061) greatly increases the rigidity and stability of the chassis to provide maximum control and consistency necessary for any form of competition or high performance street driving.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for street performance, drag race, and handling applications, BMR Suspension BK061 Poly Cradle Bushings are the perfect wheelhop solution for any Sixth Gen Camaro where NVH is not a concern. BMR’s Rear Cradle Bushings reduce cradle movement over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These “voids”, coupled with soft material produce excessive differential movement during normal and aggressive driving. BMR’s poly cradle bushings replace the entire OE rubber bushing, minimizing differential movement by replacing the soft rubber OE bushings with solid two-piece poly bushings. This reduces cradle movement, reducing wheelhop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s BK061 Differential Busing Kit is available in red with zinc-coated hardware. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-newer Chevrolet Camaro \u003cbr\u003e- Designed for street performance, drag race, and handling applications\u003cbr\u003e- 95-durometer polyurethane cradle bushings\u003cbr\u003e- Oversized 6061-T6 billet aluminum inner bushing sleeves\u003cbr\u003e- Reduces bushing deflection\u003cbr\u003e- Greatly reduces wheelhop\u003cbr\u003e- 3-4 hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/BK061.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18502717472883,"sku":"BK061","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_5d286254-2173-4e46-bded-2dbe0944c914.PNG?v=1585672013"},{"product_id":"bmr-suspension®-bk070-radius-rods-bearing","title":"BMR Suspension® (16-24) Camaro 6th Gen Radius Rods Bearing","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eImprove steering response and feel, and adding cornering consistency to your 2016-newer Chevrolet Camaro is easy with spherical radius rod bearings from BMR Suspension. Soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s spherical radius rod bearings for Sixth Gen Camaros (BK070) feature a CNC-machined bearing cup and a heavy-duty 1-inch spherical bearing. This design eliminates bushing deflection, tremendously improving performance. Spherical bearings add a solid, more responsive feel over the stock rubber bushings. CNC-machined billet aluminum spacers complete the assembly. This allows for a perfect fit and increased performance for any driving style.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the BK070 to work well in street performance, drag race, and road race applications. The stock radius rod bushings flex under cornering loads giving you inconsistent handling characteristics. BMR’s radius rod bushings eliminate deflection, giving you much improved repeatability on the street, starting line, or in the corners. This also reduces front alignment changes during aggressive cornering when high loads are applied to the chassis. BMR’s spherical bearings are designed to stand up to high loads of any performance environment. The bearings offer plenty of articulation for great handling. These are the perfect upgrade for the enthusiast looking to improve performance. When performance is a must, rely on BMR Suspension! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s BK070 Front Radius Rod Spherical Bearing Kit is available in black. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-newer Chevrolet Camaro \u003cbr\u003e- Designed for street performance, drag race, and handling applications\u003cbr\u003e- Replaces the factory front radius rod bushings \u003cbr\u003e- Heavy-duty 1-inch spherical bearings\u003cbr\u003e- CNC-machined bearing cup\u003cbr\u003e- Eliminates front radius rod bushing deflection\u003cbr\u003e- Decreases front alignment changes during aggressive driving\u003cbr\u003e- Increases steering feel and stability\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/BK070.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18502718947443,"sku":"BK070","price":339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_6b3101a0-8613-4d93-a6dc-dfb2e7fd6e6d.PNG?v=1585672015"},{"product_id":"bmr-suspension®-bk063-rear-cradle-lockout-bushing-kit","title":"BMR Suspension® (16-24) Camaro 6th Gen Rear Cradle Lockout Bushing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe width=\"600\" height=\"450\" src=\"https:\/\/www.youtube.com\/embed\/leMCg1I0_qE\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eReduce wheelhop, bushing deflection, and rear cradle movement on your 2016-newer Chevrolet Camaro with a Rear Cradle Bushing Lockout Kit from BMR Suspension. Built from CNC-machined Delrin, laser-cut stainless steel, and billet aluminum, the BMR BK063 Rear Cradle Bushing Lockout Kit is designed to greatly reduce cradle bushing deflection, which is one of the biggest causes of wheelhop. The BK063 Delrin upper bushing inserts are CNC-machined and specifically designed to fill the voids in the factory bushings (front and rear). The additional hollow space is filled with CNC-aluminum “bullet” inserts. The kit is finished with laser-cut stainless steel washers that capture the lower Delrin inserts and prevent up and down movement. Filling the voids in the bushings greatly reduces the deflection, which allows more power and torque to be transferred to the ground instead of being absorbed by the chassis.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the BK063 Cradle Bushing Lockout Kit for street performance, drag race, and handling applications. This 100% bolt-on kit use existing boltholes and hardware, allowing for easy installation with simple hand tools. Once installed, the Cradle Bushing Lockout Kit minimized bushing and cradle deflection with nearly no change in NVH. (During BMR’s testing, no change in NVH was observed without accompanying modifications.) BMR Suspension’s BK063 Cradle Bushing Lockout Kit is the only part you need to affordably and effectively lessen wheelhop, bushing deflection, and cradle movement.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThroughout testing, BMR has seen about an 80%-90% reduction in fore\/aft and lateral cradle bushing deflection. A car with no other mods and stock tires that isn’t driven overly hard is going to see a 90% or higher reduction, while a more race oriented Camaros with sticky tires will see slightly less of a reduction. Launching the test vehicle at over 7,000 rpm on drag radials, BMR saw about an 80% reduction in bushing deflection. Through the testing BMR has seen a 95% or greater reduction in vertical deflection in all testing situations. When performance is a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s BK063 Cradle Bushing Lockout Kit is available in black for long-lasting good looks. Installation time is 2-3 hours. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003e- 100% bolt-on design\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- No fabrication needed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Installs with simple hand tools\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- CNC-machined Delrin Bushing Inserts\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- CNC-machined 6061-T6 billet aluminum bushing insert “bullets”\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Laser-cut stainless steel lower bushing support washers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Greatly reduces stock bushing deflection, wheelhop, and cradle deflection \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Used factory boltholes and hardware\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly designed in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly built in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/BK063.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18502725369971,"sku":"BK063","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_2853d661-987d-4859-ac30-7d02da31c8e3.PNG?v=1585672014"},{"product_id":"bmr-suspension®-trailing-arms-bearing-kit","title":"BMR Suspension® (16-24) Camaro 6th Gen Trailing Arms Bearing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMinimize wheelhop and enhance the rear stability of your 2016 and newer Chevrolet Camaro by eliminating rear upper trailing arm bushing deflection with a set of Upper Trailing Arm Spherical Bearings from BMR Suspension. The stock rubber bushings are great for absorbing NVH, but do little for performance. The spherical bearings in BMR’s rear Upper Trailing Arm Spherical Bearing Kit simply eliminate bushing deflection, transferring power instead of absorbing it. BMR Suspension’s rear Upper Trailing Arm Spherical Bushings (BK065) drastically decreases upper trailing arm movement by eliminating deflection of the factory rubber bushings. BMR uses heavy-duty 3\/4-inch spherical bearings in machined bearing cups to replace the factory rubber bushings. The cup and bearing press into the rear spindle. CNC-machined billet aluminum spacers complete the assembly. This allows for a perfect fit and increased performance for any driving style.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for street performance, drag race, and handling applications, BMR Suspension BK065 Upper Trailing Arm Spherical Bushing Kit is the perfect wheelhop solution for any sixth gen Camaros being used for performance driving. BMR’s Upper Trailing Arm Spherical Bushings Kit offers huge increases in performance over the stock rubber upper trailing arm bushings. The OE bushings are designed with air pockets and are made from soft rubber. These “voids”, coupled with soft material produce excessive upper trailing arm movement during normal and aggressive driving. BMR’s Upper Trailing Arm Spherical Bushings kit installs in place of the OE rubber bushing, nearly eliminating upper trailing arm movement by solidly linking the upper trailing arm to the rear spindle. This eliminates almost all upper trailing arm bushing movement, reducing wheelhop and increases handling stability, while giving you a much improved overall feel in any performance driving situation. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s BK065 Upper Trailing Arm Spherical Bearings are available in a durable black anodized finish. Installation time is about 2-3 hours. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-Newer Chevrolet Camaro \u003cbr\u003e- Designed for street performance, drag race, and handling applications\u003cbr\u003e- Replaces the factory upper trailing arm bushings (outer)\u003cbr\u003e- Heavy-duty 3\/4-inch spherical bearings\u003cbr\u003e- Machined bearing cups\u003cbr\u003e- CNC-machined billet aluminum spacers\u003cbr\u003e- Eliminates rear upper control arm bushings deflection\u003cbr\u003e- Decreases wheelhop\u003cbr\u003e- Increases throttle response\u003cbr\u003e- Increases traction\u003cbr\u003e- Reduces rear spindle rotation\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/BK065.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Upper Outer","offer_id":18502747422835,"sku":"BK065","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Lower Outer","offer_id":18502747455603,"sku":"BK066","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_4e7582f8-3d84-4295-a85c-66452777fd8f.PNG?v=1585672010"},{"product_id":"bmr-suspension®-differential-bushing-kit","title":"BMR Suspension® (16-24) Camaro 6th Gen Differential Bushing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.0L\/3.6L\/6.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eReduce wheelhop, and enhance the rear stability of your 2016 and newer Chevy Camaro by decreasing differential movement with billet aluminum differential bushings from BMR Suspension. Billet aluminum is far superior to OEM rubber for bushings. It doesn’t deflect, and it will survive exposure to petroleum products, road salt, ozone, and other elements of the harsh undercar environment suspension bushings live in. Billet aluminum can also withstand much higher temperatures than rubber, polyurethane, and Delrin, making it a great choice for race cars where the differential creates large amounts of heat for extended periods of time. BMR Suspension’s Billet Aluminum Differential Bushings (BK059) eliminate differential movement and pinion rise over the factory rubber bushings. Each bushing is CNC-machined to exact tolerances, which are designed by BMR. This allows for a perfect fit and increased performance for any driving style.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for street performance, drag race, and handling applications, BMR Suspension BK059 Differential Bushings are the perfect wheelhop solution for any 6th Gen Camaro being used for performance driving. BMR’s Billet Aluminum Differential Bushings offer huge increases in performance over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These “voids”, coupled with soft material produce excessive differential movement during normal and aggressive driving. BMR’s billet aluminum differential bushings replace the entire OE rubber bushing, eliminating differential movement by replacing the soft rubber OE bushings with four solid two-piece aluminum bushings. This eliminates all differential movement, reducing wheelhop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. Solid mounting the differential will increase NVH.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s BK059 Differential Bushing Kit come black anodized for long lasting good looks. Installation time is about 3-4 hours and may vary depending on stock bushing removal technique. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-newer Chevy Camaro \u003cbr\u003e- Designed for max-effort street performance, drag race, and handling applications\u003cbr\u003e- Billet aluminum differential bushings\u003cbr\u003e- Eliminates differential bushing deflection\u003cbr\u003e- Will survive in the harshest racing environments\u003cbr\u003e- Durable anodized finish\u003cbr\u003e- 3-4 hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Billet Alumnium \/ Black","offer_id":18505581625459,"sku":"BK059","price":229.95,"currency_code":"USD","in_stock":true},{"title":"Polyurethane \/ Blue","offer_id":18505581658227,"sku":"BK057","price":109.95,"currency_code":"USD","in_stock":true},{"title":"Polyurethane \/ Red","offer_id":18505581690995,"sku":"BK058","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_ba8f6020-c9d2-4304-929a-023634c9c8a9.PNG?v=1585671991"},{"product_id":"bmr-suspension®-bk060-differential-bushing-lockout","title":"BMR Suspension® (16-24) Camaro 6th Gen Differential Bushing Lockout","description":"\u003cp\u003e\u003cstrong\u003eCompatible:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2016 - 2023 Chevy Camaro\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMinimize wheelhop and enhance the rear stability of your 2016 and newer Chevrolet Camaro by decreasing differential movement with a Differential Bushing Lockout Kit from BMR Suspension. The stock rubber bushing with large void are great for absorbing NVH, but do nothing for performance. The billet aluminum inserts in BMR’s Differential Bushing Lockout Kit simply keep the bushing from deflecting. This non-permanent modification keeps the factory bushing in place, so NVH is nearly unchanged. BMR Suspension’s Differential Bushings Lockout Kit (BK060) drastically decreases differential movement and pinion rise over the factory rubber bushings. BMR designed its Differential Bushing Lockout Kit from 6061-T6 billet aluminum. This material is extremely strong, without significant weight gains. Each bushing lockout plate is CNC-machined to exact shape and tolerances. This allows for a perfect fit and increased performance for any driving style.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eDesigned for street performance, drag race, and handling applications, BMR Suspension BK060 Differential Bushing Lockout Kit is the perfect wheelhop solution for any Sixth Gen Camaro being used for performance driving. BMR’s Differential Bushing Lockout Kit offers huge increases in performance over the stock rubber bushings. The OE bushings are designed with air pockets and are made from soft rubber. These “voids”, coupled with soft material produce excessive differential movement during normal and aggressive driving. BMR’s Differential Bushing Lockout kit installs into the OE rubber bushing, nearly eliminating differential movement by filling the space in the factory bushings. This eliminates almost all differential movement, reducing wheelhop and increases handling stability, while giving you a much-improved overall feel in any performance driving situation. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s BK060 Differential Bushing lockout Kit is available in a durable black finish and comes with all necessary hardware. Installation time is about 1 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2016-newer Chevrolet Camaro \u003cbr\u003e- Designed for street performance, drag race, and handling applications\u003cbr\u003e- Installs over the factory differential bushings\u003cbr\u003e- Decreased bushing deflection\u003cbr\u003e- Decreases wheelhop\u003cbr\u003e- Increases throttle response\u003cbr\u003e- Increases traction\u003cbr\u003e- CNC-machined from 6061-T6 billet aluminum\u003cbr\u003e- Non-permanent installation\u003cbr\u003e- 1 hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/BK060.pdf\"\u003e\u003cspan\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18505591554163,"sku":"BK060","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_5fb6575c-2b4b-4f3b-b59a-c5f30ed65b11.PNG?v=1585672012"},{"product_id":"bmr-suspension®-rear-on-car-adjustable-toe-rods","title":"BMR Suspension® (05-23) Mopar V8 Rear On-Car Adjustable Toe Rods","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp\u003e2006 - 2023 Dodge Charger\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"1200\" height=\"938\" src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"1200\" height=\"925\" src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe stock control arm with soft rubber bushings deflects under load and absorbs power instead of transferring it to the tires. BMR's rod end, on-car control arm is manufactured from heavy-duty CNC-machined 1-5\/8\", 0.250\" wall threaded steel tube. The telescoping center adjuster is CNC-machined from chrome-moly steel with rolled threads for the ultimate in strength and durability. This design gives you a strong control arm that greatly improves performance. BMR's 1\" rod ends offer high levels of strength and articulation. When the highest levels of performance are required, BMR uses heavy-duty Teflon-lined Viking Performance rod ends. Installation time is about 2-3 hours. \u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/TR110.pdf\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black Hammertone","offer_id":18507410210931,"sku":"TR110H","price":329.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":18507410243699,"sku":"TR110R","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_cc4b188a-8a81-4eed-b245-385dce883ff4.PNG?v=1585672005"},{"product_id":"bmr-suspension®-rear-non-adjustable-trailing-arms","title":"BMR Suspension® (05-23) Mopar Rear Non-Adjustable Trailing Arms","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.7L\/3.5L\/3.6L\/5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp\u003e2006 - 2023 Dodge Charger\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003ciframe width=\"1200\" height=\"925\" src=\"https:\/\/www.youtube.com\/embed\/B4p32ewV97A\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003eLaunching harder, reducing wheel hop, and adding cornering consistency to your 2008-2019 Dodge Challenger is easy with upper trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s polyurethane, non-adjustable trailing arms for Challengers (UTA110) are manufactured from heavy-duty CNC laser cut, CNC formed 3\/16-inch steel plate. This design gives you a strong control arm that greatly improves performance. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR’s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.\u003cbr\u003e\u003cbr\u003eBMR Suspension designed the UTA110 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The UTA110’s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!\u003cbr\u003e\u003cbr\u003eBMR Suspension’s UTA110 non-adjustable polyurethane upper trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2 hours. Proudly made in the U.S.A.\u003cbr\u003e\u003cbr\u003e**Recommended for use up to 650 RWHP**\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eLaunching harder, reducing wheel hop, and adding cornering consistency to your 2008-2020 Dodge Challenger is easy with lower trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s polyurethane, non-adjustable trailing arms for Challengers (LTA110) are manufactured from heavy-duty 0.75-x1.5-inch boxed steel tubing. The open end is formed from CNC laser cut, CNC formed 3\/16-inch steel plate. This design gives you a strong trailing arm that greatly improves performance. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR’s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the LTA110 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The LTA110’s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s LTA110 non-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e- Designed to the factory length\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- High-durometer internally fluted polyurethane greasable bushings\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- MIG-welded 0.75-x1.5-inch boxed steel tubing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Dramatically reduces trailing arm flex\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Greatly reduces bushing deflection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Improved Performance with acceptable NVH levels\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Designed for street performance, drag race, and road race applications\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Durable powdercoat finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 1 hour installation time\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly designed in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guides:\u003cbr\u003e\u003cbr\u003e      (UPPER)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/UTA110.pdf\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/a\u003e     \u003cstrong\u003e(LOWER)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/LTA110.pdf\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" alt=\"\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Upper \/ Black Hammertone","offer_id":18507423645811,"sku":"UTA110H","price":169.95,"currency_code":"USD","in_stock":true},{"title":"Upper \/ Red","offer_id":18507427479667,"sku":"UTA110R","price":169.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Black Hammertone","offer_id":18507427512435,"sku":"LTA110H","price":109.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Red","offer_id":18507427545203,"sku":"LTA110R","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_153be953-55ff-42fb-84bb-713f8757022c.PNG?v=1585672004"},{"product_id":"rear-lower-single-adjustable-trailing-arms","title":"BMR Suspension® (05-23) Mopar Rear Lower Single Adjustable Trailing Arms","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.7L\/3.5L\/3.6L\/5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp\u003e2006 - 2023 Dodge Charger\u003cbr\u003e\u003cbr\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"1200\" height=\"925\" src=\"https:\/\/www.youtube.com\/embed\/B4p32ewV97A\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLaunching harder, reducing wheel hop, and adding cornering consistency to your 2008-2017 Dodge Challenger is easy with upper trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s rod ended, single-adjustable trailing arms for Challenger (UTA111) are manufactured from heavy-duty 1-inch DOM steel tubing. This design gives you a strong trailing arm that greatly improves performance. The UTA111 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performance\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the UTA111 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The UTA111’s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s UTA111 adjustable upper trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2 hour. Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guides:\u003cbr\u003e\u003cbr\u003e     (UPPER)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/UTA111.pdf\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" alt=\"\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/a\u003e     \u003cstrong\u003e(LOWER)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/LTA111.pdf\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" alt=\"\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/UTA111.pdf\" target=\"_blank\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Upper \/ Black Hammertone","offer_id":18507433672819,"sku":"UTA111H","price":309.95,"currency_code":"USD","in_stock":true},{"title":"Upper \/ Red","offer_id":18507433705587,"sku":"UTA111R","price":309.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Black Hammertone","offer_id":18507433738355,"sku":"LTA111H","price":299.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Red","offer_id":18507433771123,"sku":"LTA111R","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_b4de7cb9-e463-438d-aad2-ddfeba4699fa.PNG?v=1585672002"},{"product_id":"bmr-suspension®-on-car-adjustable-trailing-arms","title":"BMR Suspension® (05-23) Mopar On-Car Adjustable Trailing Arms","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.7L\/3.5L\/3.6L\/5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp\u003e2006 - 2023 Dodge Charger\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e2005 - 2008 Dodge Magnum\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/B4p32ewV97A\" height=\"925\" width=\"1200\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/SuJ7LqEyIWQ?list=TLPQMDUwNTIwMjA2Oz_AgX4EHg\" height=\"925\" width=\"1200\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLaunching harder, reducing wheel hop, and adding cornering consistency to your 2008-2019 Dodge Challenger is easy with lower trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s rod ended, on-car adjustable trailing arms for Challenger (LTA112) are manufactured from heavy-duty 1-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong trailing arm that eliminates deflection and greatly improves performance. The LTA112 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performance\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the LTA112 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The LTA112’s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR Suspension! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s LTA112 on-car adjustable lower trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits all 2008-2019 Dodge Challenger \u003cbr\u003e- On-car adjustable design\u003cbr\u003e- Heavy-duty zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends\u003cbr\u003e- Built from 1-inch DOM steel tubing\u003cbr\u003e- TIG-welded Chrome-moly tube adapters\u003cbr\u003e- Eliminates trailing arm flex\u003cbr\u003e- Eliminates bushing deflection\u003cbr\u003e- Designed for street performance, drag race, and road race applications\u003cbr\u003e- Durable powdercoat finish\u003cbr\u003e- 1 hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/UTA112.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Upper \/ Black Hammertone","offer_id":18507446321267,"sku":"UTA112H","price":329.95,"currency_code":"USD","in_stock":true},{"title":"Upper \/ Red","offer_id":18507446354035,"sku":"UTA112R","price":329.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Black Hammertone","offer_id":18507446386803,"sku":"LTA112H","price":319.95,"currency_code":"USD","in_stock":true},{"title":"Lower \/ Red","offer_id":18507446419571,"sku":"LTA112R","price":319.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_13545891-37b9-42d4-a792-5420f046d14f.PNG?v=1585671995"},{"product_id":"bmr-suspension®-upper-control-arms","title":"BMR Suspension® (05-23) Mopar V8 Upper Control Arms","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e2006 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLaunching harder, reducing wheel hop, and adding cornering consistency to your 2008-2019 Dodge Challenger is easy with upper control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s rod ended, on-car adjustable control arms for Challengers (UCA112) are manufactured from heavy-duty 1-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong control arm that eliminates deflection and greatly improves performance. The UCA112 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performance\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the UCA112 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The UCA112’s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR Suspension! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s UCA112 on-car adjustable upper trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits all 2008-2019 Dodge Challenger\u003cbr\u003e- On-car adjustable design\u003cbr\u003e- Heavy-duty zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends\u003cbr\u003e- Built from 1-inch DOM steel tubing\u003cbr\u003e- TIG-welded Chrome-moly tube adapters\u003cbr\u003e- Eliminates trailing arm flex\u003cbr\u003e- Eliminates bushing deflection\u003cbr\u003e- Designed for street performance, drag race, and road race applications\u003cbr\u003e- Durable powdercoat finish\u003cbr\u003e- 1 hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"On-Car Adjustable \/ Black Hammertone","offer_id":18507457101939,"sku":"UCA112H","price":329.95,"currency_code":"USD","in_stock":true},{"title":"On-Car Adjustable \/ Red","offer_id":18507457134707,"sku":"UCA112R","price":329.95,"currency_code":"USD","in_stock":true},{"title":"Non-Adjustable \/ Black Hammertone","offer_id":18507457167475,"sku":"UCA110H","price":179.95,"currency_code":"USD","in_stock":true},{"title":"Non-Adjustable \/ Red","offer_id":18507457200243,"sku":"UCA110R","price":179.95,"currency_code":"USD","in_stock":true},{"title":"Single-Adjustable \/ Black Hammertone","offer_id":18507457233011,"sku":"UCA111H","price":299.95,"currency_code":"USD","in_stock":true},{"title":"Single-Adjustable \/ Red","offer_id":18507457265779,"sku":"UCA111R","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_c14f9bf6-11f7-4040-8fe9-4485e80210ad.PNG?v=1585672011"},{"product_id":"bmr-suspension®-bolt-on-subframe-connectors","title":"BMR Suspension® (08-23) Challenger Bolt-on Subframe Connectors","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (3.5L\/3.6L\/5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/AGPi53ODvgA\" height=\"925\" width=\"1200\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese chassis flex dramatically, even with mild amounts of torque and horsepower. BMR's sub-frame connectors are manufactured from a mix of heavy-duty square steel tubing, with laser-cut CNC-formed steel plate, and add loads of strength in all the right places. These sub-frame connectors are engineered to considerably strengthen the chassis. \u003c\/p\u003e\n\u003cp\u003eManufactured from square steel tubing\u003cbr\u003eUses 3\/16\" laser-cut, CNC-formed steel plate\u003cbr\u003e100% bolt-in design\u003cbr\u003eThree attachment points for superior chassis stiffening\u003cbr\u003eFully MIG-welded\u003cbr\u003eIncludes all needed brackets and hardware\u003cbr\u003eDesigned for street performance, drag race, and handling applications\u003cbr\u003eProudly designed and made in the U.S.A.\u003cbr\u003eProven to deliver superior durability and quality\u003cbr\u003eMade to push your vehicle to the next level\u003cbr\u003eManufactured from the finest materials with quality in mind \u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guides:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/SFC110.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black Hammertone","offer_id":18507459592307,"sku":"SFC110H","price":669.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":18507459625075,"sku":"SFC110R","price":669.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_bafa5e0a-66f2-47c1-b855-6c870c20205c.PNG?v=1585671243"},{"product_id":"bmr-suspension®-adjustable-end-link-kit","title":"BMR Suspension® (05-23) Mopar Adjustable End Link Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.7L\/3.5L\/3.6L\/5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp\u003e2006 - 2023 Dodge Charger\u003cbr\u003e\u003cbr\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e2005 - 2008 Dodge Magnum\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"1200\" height=\"925\" src=\"https:\/\/www.youtube.com\/embed\/SE-Rzpsju7g\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe amount of force exerted on the sway bar end link is staggering—especially if you’ve upgraded to an aftermarket sway bar, like BMR Suspension's adjustable and non-adjustable 2008-2019 Dodge Challenger sway bars. The stock end links are weak and can bend or break. BMR’s ELK110 front and rear end link kit allows you to push your Challenger to the limit without fear of end link deflection. BMR manufactures the ELK110s out of CNC-machined billet aluminum bar stock. The links are completed with heavy-duty, Teflon-lined rod ends. The rod ends attach to the sway bar with supplied hardware. This combination of components gives you a huge increase in strength over stock end links.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR designed the ELK110 front and rear sway bar end link kit for street performance, autocross, and road race applications. BMR’s heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMR’s ELK110 will not deflect, giving you the full potential of the sway bar—no matter how hard you drive. The adjustable links give you the ability to easily correct sway bar geometry and working angles on lowered Challengers, as well as cars with adjustable sway bars. The ELK110 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMR’s adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s ELK110 sway bar end links are available in a durable black anodized finish for long-lasting good looks. Installation time is about 2 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits all 2008-2019 Dodge Challenger\u003cbr\u003e- Adjustable design \u003cbr\u003e- Durable black anodized finish\u003cbr\u003e- On-car adjustable\u003cbr\u003e- 6061-T6 billet aluminum construction\u003cbr\u003e- Fully CNC-machined\u003cbr\u003e- Heavy-duty, Telfon-lines rod ends\u003cbr\u003e- Dramatically reduces sway bar end link deflection\u003cbr\u003e- Designed to withstand high compression loads\u003cbr\u003e- Allows for proper sway bar working angles and geometry on lowered Camaros\u003cbr\u003e- Allows for preloading of sway bars to fine-tune suspension setup\u003cbr\u003e- Designed for street performance, autocross, and road race applications\u003cbr\u003e- 2-hour installation time\u003cbr\u003e- Proudly designed in the U.S.A.\u003cbr\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/ELK110.pdf\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Front\/Rear","offer_id":18507468439667,"sku":"ELK110","price":319.95,"currency_code":"USD","in_stock":true},{"title":"Front","offer_id":18507468472435,"sku":"ELK111","price":189.95,"currency_code":"USD","in_stock":true},{"title":"Rear","offer_id":18507468505203,"sku":"ELK112","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_81bb746c-6f57-449e-a58d-91f060d7d102.PNG?v=1585671242"},{"product_id":"bmr-suspension®-super-pro™-control-arm-bushing-kit","title":"BMR Suspension® (05-23) Mopar Super Pro™ Control Arm Bushing kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.7L\/3.5L\/3.6L\/5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp\u003e2006 - 2023 Dodge Charger\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e2005 - 2008 Dodge Magnum\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe width=\"1200\" height=\"938\" src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003ciframe width=\"1200\" height=\"925\" src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw?list=TLPQMDUwNTIwMjAa8Mjq2yWSbg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReduce deflection, improve handling, and maintain a comfortable quiet ride with elastomer bushing from SuperPro. SuperPro bushings are made from low-deflection elastomer, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking, with minimal changes in NVH. Each bushing is designed to exact tolerances, allowing for a perfect fit and increased performance for any driving style. The SuperPro elastomer bushings greatly increase the rigidity and stability of the chassis to provide maximum control and consistency, with all of the articulation necessary for any form of high-performance driving. Installation time may vary depending on stock bushing removal technique. \u003c\/p\u003e\n\u003cp\u003eDesigned for street performance, drag race, and handling applications\u003cbr\u003eHigh-durometer viscoelastic polymer\u003cbr\u003eDirect bushing replacements\u003cbr\u003eReduces bushing deflection\u003cbr\u003eAbsorbs NVH\u003cbr\u003eAllows for articulation\u003cbr\u003eZinc-coated inner sleeves\u003cbr\u003eGreatly reduces wheelhop\u003cbr\u003eProven to deliver superior durability and quality\u003cbr\u003eMade to push your vehicle to the next level\u003cbr\u003eManufactured from the finest materials with quality in mind\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Front Upper Inner","offer_id":18507469914227,"sku":"SPF3051K","price":149.99,"currency_code":"USD","in_stock":true},{"title":"Front Lower Inner","offer_id":18507469946995,"sku":"SPF3052K","price":149.99,"currency_code":"USD","in_stock":true},{"title":"Rear Lower Inner","offer_id":18507469979763,"sku":"SPF3059K","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_83d0eec9-6ca1-43e4-a9c0-5c59e31bc504.PNG?v=1585672006"},{"product_id":"bmr-suspension®-spf3048k-super-pro™-front-non-adjustable-radius-rod-bushing-kit","title":"BMR Suspension® (08-23) Challenger Super Pro™ Front Non Adjustable Radius Rod Bushing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReduce deflection, improve handling, and maintain a comfortable quiet ride with elastomer bushing from SuperPro. SuperPro bushings are made from low-deflection elastomer, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking, with minimal changes in NVH. Each bushing is designed to exact tolerances, allowing for a perfect fit and increased performance for any driving style. The SuperPro elastomer bushings greatly increase the rigidity and stability of the chassis to provide maximum control and consistency, with all of the articulation necessary for any form of high-performance driving. Installation time may vary depending on stock bushing removal technique. \u003c\/p\u003e\n\u003cp\u003eDesigned for street performance, drag race, and handling applications\u003cbr\u003eHigh-durometer viscoelastic polymer\u003cbr\u003eDirect bushing replacements\u003cbr\u003eReduces bushing deflection\u003cbr\u003eAbsorbs NVH\u003cbr\u003eAllows for articulation\u003cbr\u003eZinc-coated inner sleeves\u003cbr\u003eGreatly reduces wheelhop\u003cbr\u003eProven to deliver superior durability and quality\u003cbr\u003eMade to push your vehicle to the next level\u003cbr\u003eManufactured from the finest materials with quality in mind \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18507473846387,"sku":"SPF3048K","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_6bbd35b5-fb80-4fef-ab39-1c14360922df.PNG?v=1585672019"},{"product_id":"bmr-suspension®-super-pro™-non-adjustable-rear-toe-rod-bushing-kit","title":"BMR Suspension® (05-23) Mopar Super Pro™ Non Adjustable Rear Toe Rod Bushing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.7L\/3.5L\/3.6L\/5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp\u003e2006 - 2023 Dodge Charger\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e2005 - 2008 Dodge Magnum\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReduce deflection, improve handling, and maintain a comfortable quiet ride with elastomer bushing from SuperPro. SuperPro bushings are made from low-deflection elastomer, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking, with minimal changes in NVH. Each bushing is designed to exact tolerances, allowing for a perfect fit and increased performance for any driving style. The SuperPro elastomer bushings greatly increase the rigidity and stability of the chassis to provide maximum control and consistency, with all of the articulation necessary for any form of high-performance driving. Installation time may vary depending on stock bushing removal technique. \u003c\/p\u003e\n\u003cp\u003eDesigned for street performance, drag race, and handling applications\u003cbr\u003eHigh-durometer viscoelastic polymer\u003cbr\u003eDirect bushing replacements\u003cbr\u003eReduces bushing deflection\u003cbr\u003eAbsorbs NVH\u003cbr\u003eAllows for articulation\u003cbr\u003eZinc-coated inner sleeves\u003cbr\u003eGreatly reduces wheelhop\u003cbr\u003eProven to deliver superior durability and quality\u003cbr\u003eMade to push your vehicle to the next level\u003cbr\u003eManufactured from the finest materials with quality in mind\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18507474206835,"sku":"SPF3060K","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_add3b9ba-607d-468f-bd8a-38b2cd5fa8ec.PNG?v=1585672006"},{"product_id":"bmr-suspension®-super-pro™-non-adjustable-rear-trailing-arm-bushing-kit","title":"BMR Suspension® (05-23) Mopar Super Pro™ Non Adjustable Rear Trailing Arm Bushing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (3.5L\/3.6L\/5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp\u003e2006 - 2023 Dodge Charger\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e2005 - 2008 Dodge Magnum\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReduce deflection, improve handling, and maintain a comfortable quiet ride with elastomer bushing from SuperPro. SuperPro bushings are made from low-deflection elastomer, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking, with minimal changes in NVH. Each bushing is designed to exact tolerances, allowing for a perfect fit and increased performance for any driving style. The SuperPro elastomer bushings greatly increase the rigidity and stability of the chassis to provide maximum control and consistency, with all of the articulation necessary for any form of high-performance driving. Installation time may vary depending on stock bushing removal technique. \u003c\/p\u003e\n\u003cp\u003eDesigned for street performance, drag race, and handling applications\u003cbr\u003eHigh-durometer viscoelastic polymer\u003cbr\u003eDirect bushing replacements\u003cbr\u003eReduces bushing deflection\u003cbr\u003eAbsorbs NVH\u003cbr\u003eAllows for articulation\u003cbr\u003eZinc-coated inner sleeves\u003cbr\u003eGreatly reduces wheelhop\u003cbr\u003eProven to deliver superior durability and quality\u003cbr\u003eMade to push your vehicle to the next level\u003cbr\u003eManufactured from the finest materials with quality in mind\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18507475124339,"sku":"SPF3058K","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_4b2e5df5-1cbd-4497-9441-43385036b5eb.PNG?v=1585672007"},{"product_id":"bmr-suspension®-super-pro™-non-adjustable-rear-upper-arm-bushing-kit","title":"BMR Suspension® (08-23) Super Pro™ Non Adjustable Rear Upper Arm Bushing Kit","description":"\u003cp\u003e\u003cstrong\u003eCompatible:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReduce deflection, improve handling, and maintain a comfortable quiet ride with elastomer bushing from SuperPro. SuperPro bushings are made from low-deflection elastomer, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking, with minimal changes in NVH. Each bushing is designed to exact tolerances, allowing for a perfect fit and increased performance for any driving style. The SuperPro elastomer bushings greatly increase the rigidity and stability of the chassis to provide maximum control and consistency, with all of the articulation necessary for any form of high-performance driving. Installation time may vary depending on stock bushing removal technique. \u003c\/p\u003e\n\u003cp\u003eDesigned for street performance, drag race, and handling applications\u003cbr\u003eHigh-durometer viscoelastic polymer\u003cbr\u003eDirect bushing replacements\u003cbr\u003eReduces bushing deflection\u003cbr\u003eAbsorbs NVH\u003cbr\u003eAllows for articulation\u003cbr\u003eZinc-coated inner sleeves\u003cbr\u003eGreatly reduces wheelhop\u003cbr\u003eProven to deliver superior durability and quality\u003cbr\u003eMade to push your vehicle to the next level\u003cbr\u003eManufactured from the finest materials with quality in mind\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18507479416947,"sku":"SPF3057K","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_9b74b0b1-853e-4a94-a601-28cf52679d9e.PNG?v=1585672008"},{"product_id":"bmr-suspension®-super-pro™-non-adjustable-front-lower-outer-control-arm-bushings","title":"BMR Suspension® (08-23) Challenger Super Pro™ Non Adjustable Front Lower Outer Control Arm Bushings","description":"\u003cp\u003e\u003cstrong\u003eCompatible:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReduce deflection, improve handling, and maintain a comfortable quiet ride with elastomer bushing from SuperPro. SuperPro bushings are made from low-deflection elastomer, which is known for its high stiffness, low friction and excellent stability. This product greatly reduces bushing deflection that occurs during acceleration, cornering, and braking, with minimal changes in NVH. Each bushing is designed to exact tolerances, allowing for a perfect fit and increased performance for any driving style. The SuperPro elastomer bushings greatly increase the rigidity and stability of the chassis to provide maximum control and consistency, with all of the articulation necessary for any form of high-performance driving. Installation time may vary depending on stock bushing removal technique. \u003c\/p\u003e\n\u003cp\u003eDesigned for street performance, drag race, and handling applications\u003cbr\u003eHigh-durometer viscoelastic polymer\u003cbr\u003eDirect bushing replacements\u003cbr\u003eReduces bushing deflection\u003cbr\u003eAbsorbs NVH\u003cbr\u003eAllows for articulation\u003cbr\u003eZinc-coated inner sleeves\u003cbr\u003eGreatly reduces wheelhop\u003cbr\u003eProven to deliver superior durability and quality\u003cbr\u003eMade to push your vehicle to the next level\u003cbr\u003eManufactured from the finest materials with quality in mind\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":18507487314035,"sku":"SPF3055K","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_15483556-1697-42a4-8740-b4c74c425535.PNG?v=1585672020"},{"product_id":"bmr-suspension®-cp001-15-20-mustang-caster-camber-plates","title":"BMR Suspension® (15-23) Mustang S550 Caster Camber Plates","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.3L\/3.7L\/5.0L\/5.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2015 - 2023 Ford Mustang\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1200\" height=\"940\" src=\"https:\/\/www.youtube.com\/embed\/pcxmRrQUeUg\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdd caster and camber adjustability, and fix alignment issues on your lowered S550 Mustang with Caster\/Camber Plates from BMR Suspension. The factory alignment adjustability can be insufficient when you lower your 2015-newer Mustang. Manufactured from CNC, laser-cut steel plate, BMR’s CP001 Caster\/Camber Plates are designed to add caster and camber adjustability to the S550 front suspension. BMR also replaces the weak factory strut mount bushing with high-quality US-made, Teflon-lined spherical bearings. This allows you to correct the alignment on lowered S550s and add aggressive alignment setting for racing applications. BMR’s CP001’s Caster\/Camber Plates replace the factory upper strut mounts. The design increases the camber adjustability and adds caster adjustability that isn’t available from the factory. These adjustments also help reduce unwanted tire wear from too much negative camber.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the CP001 Caster\/Camber Plates for street performance, drag race, and handling application. This 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation. BMR also includes spacers for larger 16mm coilover strut shafts. Once installed, the Caster\/Camber Plates give you a total camber range of 1.75 degrees. This allows you to correct the alignment on lowered Mustangs. BMR’s Caster\/Camber Plates also give you the ability to add aggressive alignment settings for both the street and track. This helps to keep the largest possible tire contact patch for autocross and road race applications. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s CP001 Caster\/Camber Plates are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2 hour. Proudly made in the U.S.A.!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2015-Newer S550 Mustang\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Adds caster and camber adjustability\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 100% bolt-on design\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- No fabrication needed\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Installs with simple hand tools\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Manufactured from CNC, laser-cut steel plate \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 1.75-degrees of total camber adjustability \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Teflon-lined spherical bearings\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Caster adjustability\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Used factory boltholes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Works with stock and factory-style aftermarket struts\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Works with Viking Performance and Strange Engineering S550 Coilovers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Works with Viking Performance and Strange Engineering S197 conversion Coilovers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Includes spacers for larger 16mm coilover strut shafts\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Designed for street performance, drag race, and handling applications\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Durable powdercoat finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Available in black hammertone and red powdercoat\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly designed in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly built in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/CP001.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black","offer_id":31169346371678,"sku":"CP001H","price":219.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":31169346404446,"sku":"CP001R","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/Screen_Shot_2019-11-26_at_10.29.03_AM.png?v=1585672017"},{"product_id":"bmr-suspension®-fc003-15-20-mustang-front-2-5-degrees-offset-camber-bolts","title":"BMR Suspension® (15-23) Mustang S550 Front, 2.5 Degrees Offset, Camber Bolts","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.3L\/3.7L\/5.0L\/5.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2015 - 2023 Ford Mustang\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCorrect front wheel alignment and add camber adjustability to the front of your S550 Mustang with Camber Bolts from BMR Suspension. The factory camber adjustability can be insufficient once your car is lowered, leading to poor handling and premature tire wear. Forged from high-strength steel, BMR’s Camber Bolts give you unrivaled strength and precision. The BMR Camber Bolts give you 2.5 degrees of additional camber adjustability on the front of your S550 Mustang. This allows you to achieve the proper camber settings on lowered vehicles, or more aggressive front alignment setting for hardcore handling applications. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the FC003 Camber Bolts for street performance, drag race, and handling applications. The FC003 assembly is precision machined, giving you the ability to make precise alignment changes. Whether you drag race, road race, or simply drive your car on the street, BMR’s FC003 is perfect for any car in need of additional camber adjustability.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s FC003 camber bolts are available in a durable black oxide finish for long-lasting good looks. Installation time is about 1 hour. Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits 2015-newer S550 Mustang \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Provides 2.5 degrees of additional camber adjustability\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Allows for proper front alignment on lowered vehicles\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Allows for aggressive alignment settings for autocross and road race applications\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Simple bolt-on installation\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Durable black finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 1 hour installation\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":31169369571422,"sku":"FC003","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/Screen_Shot_2019-11-26_at_10.43.11_AM.png?v=1585672018"},{"product_id":"bmr-suspension®-utca057-15-20-mustang-fixed-poly-bearing-billet-aluminum-camber-link","title":"BMR Suspension® (15-23) Mustang S550 Fixed, Poly\/Bearing, Billet Aluminum, Camber Link","description":"\u003cp\u003e\u003cstrong\u003eCompatible: (2.3L\/3.7L\/5.0L\/5.2L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e2015 - 2023 Ford Mustang\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLaunch harder, increase cornering stability, and correct rear suspension geometry on your lowered 2015-newer S550 Mustangs with spherical\/polyurethane upper control arms from BMR Suspension. Stock upper control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. The factory arms also don’t allow for proper camber correction on lowered vehicles. BMR’s polyurethane, non-adjustable control arms for Mustangs (UTCA057) are CNC-machined from 6061-T6 billet aluminum. This design gives you an incredibly strong control arm that greatly improves performance. Greasable, high-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR’s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension designed the UTCA057 to work well in street performance, drag race, and handling applications. The stock control arm bushings deflect excessively under cornering loads giving you inconsistent handling characteristics. BMR’s polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The UTCA057’s heavy-duty construction and strong polyurethane bushings give you much improved repeatability on the street, starting line, or in the corners. The UTCA057s are primarily designed for lowered cars that are looking to remove the camber gained from lower than stock ride height vehicles. These are designed longer than factory arms, give you the ability to correct the camber setting on lowered S550s. ALL lowered cars will benefit from these parts IF you are looking to remove negative camber. For those looking to GAIN negative camber, these are not the correct choice. With a 1.2-inch drop, the most negative camber you can get will be approximately -2.0 degrees. These work very well for drag racers who have lowered ride heights, and are looking for ZERO camber. BMR’s heavy-duty spherical bearings are designed to solidly link the spindle to the upper control arm, eliminate deflection and wheel alignment changes. Our spherical bearings will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling. Also, these arms save over 4 pounds compared to the OEM set (2.35lbs per side). On stock height cars, you cannot exceed -0.50 camber. BMR’s S550 upper control arms add no noticeable NVH. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s UTCA057 non-adjustable polyurethane upper control arms are available in a durable black anodized finished for long-lasting good looks. Installation time is about 3 hour. Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e- Fits all 2015-newer Ford Mustang \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Designed longer than factory length to correct suspension geometry on lowered S550s\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- High-durometer internally fluted polyurethane greasable bushings\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- CNC-machined 6061-T6 billet aluminum\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Spherical Bearings\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- All 304 stainless steel rod end spacers\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Greatly reduces bushing deflection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Improved Performance with zero increase in NVH \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Designed for street performance, drag race, and road race applications\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Durable anodized finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 3 hour installation time\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly designed in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/UTCA057.pdf\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":31169415675998,"sku":"UTCA057","price":459.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/Screen_Shot_2019-11-26_at_10.58.13_AM.png?v=1585672020"},{"product_id":"bmr-suspension®-04-07-cts-v-non-adjustable-spherical-trailing-arms","title":"BMR Suspension® (04-07) CTS-V Non-Adjustable Spherical Trailing Arms","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (5.7L\/6.0L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2004 - 2007 Cadillac CTS-V\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" cellpadding=\"0\" cellspacing=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv class=\"tabberlive\"\u003e\n\u003cdiv title=\"\" class=\"tabbertab\"\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eNOTE: When combined with the BMR anti-wheelhop kit, expect some additional road noise.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLaunching harder, reducing wheel hop, and adding cornering consistency to your Cadillac CTS-V is easy with trailing arms from BMR Suspension. Stock stamped steel trailing arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s spherical, non-adjustable tubular trailing arms for CTS-Vs (TCA018) are manufactured from heavy-duty 1 1\/2-inch DOM steel tubing. This design gives you a strong trailing arm that greatly improves performance. Spherical bearings offer the highest levels of strength and articulation. When the highest levels of performance are required, BMR uses heavy-duty Teflon-lines FK Bearing spherical bearings.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBMR Suspension designed the TCA018 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The TCA018’s heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s spherical bearings are designed to stand up to high loads of any performance environment. The bearings easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. These are the perfect upgrade for the enthusiast looking to improve performance. When performance is a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBMR Suspension’s TCA018 non-adjustable spherical trailing arms are available in red and black hammertone powder coat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e- Fits 2004-2007 Cadillac CTS-V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Designed to the factory length\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Heavy-duty Teflon-lined spherical bearings\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- MIG-welded 1 ½-inch DOM steel tubing\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Dramatically reduces trailing arms flex\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Eliminates bushing deflection\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Designed for street performance, drag race, and road race applications\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Durable powder coat finish\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 2-3 hour installation time\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly designed in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Proudly made in the U.S.A.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/TCA018.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Red","offer_id":32373122498654,"sku":"TCA018R","price":259.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":32373122531422,"sku":"TCA018H","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-02-02at10.45.23AM.png?v=1612280804"},{"product_id":"bmr-suspension®-05-21-mopar-v8-hollow-22mm-non-adjustable-sway-bar-kit","title":"BMR SUSPENSION® (05-23) MOPAR V8 HOLLOW 22MM NON-ADJUSTABLE SWAY BAR KIT","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2006 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" height=\"938\" width=\"1200\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" height=\"925\" width=\"1200\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"home\"\u003eRacers with 10.50 and faster ETs need the dependable strength of BMR Suspension's performance suspension components!\u003cbr\u003e\u003cbr\u003eBMR Suspension Manufactures Quality Heavy Duty Performance Control Arms, Panhard Bars, Shock Tower Braces, K-Members, Lowering Spring Kits, CV Axle Shafts, A-Arms, Trailing Arms, Sway Bars, Anti-Roll Bar Kits, Toe Rods, Driveshaft Safety Loops and much more.\u003cbr\u003e\u003cbr\u003eWe have the suspension and chassis components for your Camaro, Firebird, Nova, Trailblazer SS, SSR, Monte Carlo, Intrigue, Grand Prix, Regal, Cutlass, Grand Sport, El Camino, LeMans, Chevelle, Malibu, GTO, G8, Grand National, CTS-V, Caprice, Skylark, Buick 442, Mustang GT, Shelby GT500 and many more generations of American muscle cars from the 1960s to today, with a focus on LSX-powered machines.\u003cbr\u003e\u003cbr\u003eAll BMR Suspension components are engineered to fit with precision, withstand the forces of extreme competition, and improve traction and handling for quicker ETs so you can\u003cspan\u003e \u003c\/span\u003e\u003ci\u003eDominate Your Competition with BMR Suspension!\u003c\/i\u003e\n\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/SB112.pdf\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black Hammertone","offer_id":39273943335006,"sku":"SB112","price":289.95,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":39273943367774,"sku":"SB112","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-03-17at11.00.34AM.png?v=1615993445"},{"product_id":"bmr-suspension®-05-21-mopar-v8-front-rear-sway-bar-kit","title":"BMR Suspension® (05-23) Mopar V8 Front\/Rear Sway Bar Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2006 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFRONT SPECS:\u003c\/strong\u003e HOLLOW 38MM\/ADJUSTABLE \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eREAR SPECS:\u003c\/strong\u003e HOLLOW 25MM\/NON-ADJUSTABLE \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" height=\"938\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" height=\"925\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"home\" data-mce-fragment=\"1\"\u003eRacers with 10.50 and faster ETs need the dependable strength of BMR Suspension's performance suspension components!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBMR Suspension Manufactures Quality Heavy Duty Performance Control Arms, Panhard Bars, Shock Tower Braces, K-Members, Lowering Spring Kits, CV Axle Shafts, A-Arms, Trailing Arms, Sway Bars, Anti-Roll Bar Kits, Toe Rods, Driveshaft Safety Loops and much more.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe have the suspension and chassis components for your Camaro, Firebird, Nova, Trailblazer SS, SSR, Monte Carlo, Intrigue, Grand Prix, Regal, Cutlass, Grand Sport, El Camino, LeMans, Chevelle, Malibu, GTO, G8, Grand National, CTS-V, Caprice, Skylark, Buick 442, Mustang GT, Shelby GT500 and many more generations of American muscle cars from the 1960s to today, with a focus on LSX-powered machines.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAll BMR Suspension components are engineered to fit with precision, withstand the forces of extreme competition, and improve traction and handling for quicker ETs so you can\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ci data-mce-fragment=\"1\"\u003eDominate Your Competition with BMR Suspension!\u003c\/i\u003e\n\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/SB112.pdf\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/SB112.pdf\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Black Hammertone \/ Front\/Rear","offer_id":39273955917918,"sku":"SB113","price":689.95,"currency_code":"USD","in_stock":true},{"title":"Black Hammertone \/ Front","offer_id":39273955950686,"sku":"SB114","price":399.95,"currency_code":"USD","in_stock":true},{"title":"Black Hammertone \/ Rear","offer_id":39273955983454,"sku":"SB115","price":319.95,"currency_code":"USD","in_stock":true},{"title":"Red \/ Front\/Rear","offer_id":39273956016222,"sku":"SB113","price":689.95,"currency_code":"USD","in_stock":true},{"title":"Red \/ Front","offer_id":39273956048990,"sku":"SB114","price":399.95,"currency_code":"USD","in_stock":true},{"title":"Red \/ Rear","offer_id":39273956081758,"sku":"SB115","price":319.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-03-17at11.14.33AM.png?v=1615994353"},{"product_id":"bmr-suspension®-05-21-mopar-v8-1-25-drop-lowering-coil-springs","title":"BMR Suspension® (05-23) Mopar V8 1.25\" Drop Lowering Coil Springs","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (5.7L\/6.1L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2006 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" height=\"938\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" height=\"925\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"home\" data-mce-fragment=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your Challenger needs to perform, too! BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBlending aesthetics and performance, BMR has designed the SP110 for the street performance crowd who want to use their cars in a variety of applications. These springs will lower your V8-equipped 2008 and newer Challenger by 1.25 inches in the front and rear. The 280 lb\/in (front) and 720 lb\/in (rear) linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. The lowered stance and increased spring rate decreases body roll and gives you a lower center of gravity for increased driver control in aggressive cornering situations. Combine this with BMR adjustable sway bars and you have the ultimate in handling and performance. When performance and looks are a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSP110 Lowering Springs will lower Hellcat, Demon, and Redeye Challengers by approximately 1.5 inches in the front and 1.25 inches in the rear.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension’s SP110 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eLowers your V8-equipped 2008 and newer Challenger by 1.25-inches\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Dramatically improves handling and ride quality\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Lower center of gravity\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Decreased body roll\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Improved driver control\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- 280lb front, 720lb rear spring rates\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Manufactured from chrome silicon high-tensile spring wire\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Lifetime warranty against spring sag\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Stress-relieved at 750 degrees F\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Shot-peened\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Computer tested for accurate height and spring rate\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e- Made in the U.S.A.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/SP110.pdf\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Front\/Rear","offer_id":39273962373214,"sku":"SP110","price":299.95,"currency_code":"USD","in_stock":true},{"title":"Front","offer_id":39273962405982,"sku":"SP111","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Rear","offer_id":39273962438750,"sku":"SP112","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-03-17at11.30.01AM.png?v=1615995256"},{"product_id":"bmr-suspension®-15-21-mopar-v8-differential-lockout-bushing-kit","title":"BMR Suspension® (15-23) Mopar V8 Differential Lockout Bushing Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (5.7L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2015 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2015 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2015 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe width=\"1200\" height=\"938\" src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" data-mce-fragment=\"1\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe width=\"1200\" height=\"925\" src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" data-mce-fragment=\"1\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch3 class=\"home\" data-mce-fragment=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eThere is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your Challenger needs to perform, too! BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBlending aesthetics and performance, BMR has designed the SP110 for the street performance crowd who want to use their cars in a variety of applications. These springs will lower your V8-equipped 2008 and newer Challenger by 1.25 inches in the front and rear. The 280 lb\/in (front) and 720 lb\/in (rear) linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. The lowered stance and increased spring rate decreases body roll and gives you a lower center of gravity for increased driver control in aggressive cornering situations. Combine this with BMR adjustable sway bars and you have the ultimate in handling and performance. When performance and looks are a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSP110 Lowering Springs will lower Hellcat, Demon, and Redeye Challengers by approximately 1.5 inches in the front and 1.25 inches in the rear.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBMR Suspension’s SP110 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003eLowers your V8-equipped 2008 and newer Challenger by 1.25-inches\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Dramatically improves handling and ride quality\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Lower center of gravity\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Decreased body roll\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Improved driver control\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- 280lb front, 720lb rear spring rates\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Manufactured from chrome silicon high-tensile spring wire\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Lifetime warranty against spring sag\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Stress-relieved at 750 degrees F\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Shot-peened\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Computer tested for accurate height and spring rate\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e- Made in the U.S.A.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":39273991733342,"sku":"DMB110","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-03-17at12.18.03PM.png?v=1615998111"},{"product_id":"bmr-suspension®-15-21-mopar-v8-differential-mount-housing-bushing-kit","title":"BMR Suspension® (15-23) Mopar V8 Differential Mount Housing Bushing Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2015 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2015 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2015 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" height=\"938\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" height=\"925\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/DMB111.pdf\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Polyurethane","offer_id":39274386456670,"sku":"DMB111","price":229.95,"currency_code":"USD","in_stock":true},{"title":"Aluminum","offer_id":39274386489438,"sku":"DMB112","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-03-17at3.40.36PM.png?v=1616010257"},{"product_id":"bmr-suspension®-05-21-mopar-v8-rear-cradle-lockout-bushing-kit","title":"BMR Suspension® (05-23) Mopar V8 Rear Cradle Lockout Bushing Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2006 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe data-mce-fragment=\"1\" width=\"1200\" height=\"938\" src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe data-mce-fragment=\"1\" width=\"1200\" height=\"925\" src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/DMB111.pdf\" data-mce-href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/DMB111.pdf\"\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg data-mce-fragment=\"1\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":39274438656094,"sku":"SCB110","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-03-17at3.53.36PM.png?v=1616011067"},{"product_id":"bmr-suspension®-05-21-mopar-v8-rear-cradle-bushing-kit","title":"BMR Suspension® (05-23) Mopar V8 Rear Cradle Bushing Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2006 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" height=\"938\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" height=\"925\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/SCB111.pdf\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Polyurethane","offer_id":39274457563230,"sku":"SCB111","price":299.95,"currency_code":"USD","in_stock":true},{"title":"Aluminum","offer_id":39274457595998,"sku":"SCB112","price":649.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-03-17at4.01.11PM.png?v=1616011387"},{"product_id":"bmr-suspension®-05-21-mopar-v8-delrin-bushing-kit","title":"BMR Suspension® (05-23) Mopar V8 Delrin Bushing Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (5.7L\/6.1L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2023 Chrysler 300\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2006 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe width=\"1200\" height=\"938\" src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" data-mce-fragment=\"1\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe width=\"1200\" height=\"925\" src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" data-mce-fragment=\"1\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e   \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":39274487709790,"sku":"CBK112","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-03-17at4.08.22PM.png?v=1616011931"},{"product_id":"bmr-suspension®-05-10-mopar-sway-bar-mount-bushing-kit","title":"BMR Suspension® (05-10) Mopar Sway Bar Mount Bushing Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (2.7L\/3.5L\/5.7L\/6.1L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2010 Chrysler 300\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2008 - 2010 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2006 - 2010 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2005 - 2008 Dodge Magnum\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" height=\"938\" width=\"1200\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" height=\"925\" width=\"1200\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\" data-mce-fragment=\"1\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/DMB111.pdf\" data-mce-href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/DMB111.pdf\" data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" data-mce-fragment=\"1\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Front \/ 30mm","offer_id":39274560258142,"sku":"SPF-2914-30K","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Front \/ 32mm","offer_id":39274560290910,"sku":"SPF-2914-32K","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Rear \/ 18mm","offer_id":39274560323678,"sku":"SPF-2915-18K","price":50.99,"currency_code":"USD","in_stock":true},{"title":"Rear \/ 20mm","offer_id":39274560356446,"sku":"SPF-2915-20K","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/ScreenShot2021-03-17at4.28.45PM.png?v=1616013028"},{"product_id":"bmr-suspension®-11-22-charger-challenger-engine-mount-kit","title":"BMR Suspension® (11-23) Charger\/Challenger Engine Mount Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCompatible: (3.6L\/5.7L\/6.2L\/6.4L)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2011 - 2023 Dodge Challenger\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e2011 - 2023 Dodge Charger \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" height=\"938\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/cW-IdVLMElE\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" height=\"925\" width=\"1200\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.youtube.com\/embed\/gXZtqKESkJw\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEngine movement (deflection) is wasted horsepower, and that power is yours! BMR Suspension wants you to take it back with its polyurethane motor mounts for 2011-2020 Dodge Challengers and Chargers. BMR’s new motor mounts (MM110) are far superior to the bulky, stock bushings, which are designed for comfort, not performance. BMR manufactures its MM110 polyurethane motor mounts in its Florida facility from CNC-laser cut ¼-inch plate steel with aircraft-grade 6061 billet aluminum spacers and 95-durometer polyurethane bushings. The kit is completed with Grade-8 hardware.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBMR Suspension designed the MM110 to be the perfect (100% bolt-in) motor mount for any power level or application (street performance, drag race, and road race) where engine deflection needs to be reduced. The factory motor mounts are designed to dampen engine vibration, giving you the smoothest and most comfortable experience possible. Unfortunately, this does little to limit engine movement. This deflection means lackluster throttle response, slower reaction times, and less accurate shifts in manual-equipped cars. BMR’s MM110 polyurethane motor mounts limit engine deflection, while isolating much of the engine vibration from the vehicle’s occupants. This means you won’t feel a big increase in NVH. The reduction in deflection leads to less wasted power as it’s transferred to the tires, improving your driving experience on both the street and track. And less drivetrain movement means more accurate shifts as you row through the gears. They are also height adjustable. Simply remove the aluminum spacers to lower the engine a ¼- or 1\/2-inch in the engine bay (larger engine drops are possible—call for more info). This will give increased under-hood clearance for a strut tower brace or supercharger, and a lower center of gravity for improved handling. When performance is a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBMR Suspension’s MM110 polyurethane motor mounts are black anodized for long-lasting good looks in your car’s most harsh environment. Installation time is about 2-3 hours with stock exhaust manifolds (installation time may be longer with aftermarket headers). Proudly made in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFor hardcore drag race and road race applications where engine deflection needs to be eliminated, BMR Suspension offers the MM006 solid upgrade. These black anodized billet aluminum pucks replace the polyurethane bushing, making the MM110 into a solid motor mount. These are designed for max-effort application where NVH is not a concern.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFits all for 2011-2020 Dodge Challengers and Chargers\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e95-durometer polyurethane bushings\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLaser cut ¼-inch plate steel with a durable powdercoat finish\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBlack anodized 6061-T6 aircraft-grade billet aluminum spacers\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGrade-8 hardware\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eReduced engine deflection\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eBetter throttle response\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eQuicker reaction times\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMore accurate shifts (Manual-equipped cars)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eEngine can be easily lowered up to a 1\/2-inch for more under-hood clearance\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned for street performance, drag race, and road race applications\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned to work well with any power level\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2-3 hour installation time\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eProudly designed in the U.S.A.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eProudly made in the U.S.A.\u003c\/span\u003e  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/MM110.pdf\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Wrench_small.jpg?v=1528997396\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"BMR Suspension","offers":[{"title":"Polyurethane","offer_id":39713365131358,"sku":"MM110","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Solid","offer_id":39713365164126,"sku":"MM111","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/products\/1_33a29963-ce86-4871-bc2a-e040f05139c6.jpg?v=1654276723"},{"product_id":"bmr-suspension®-16-24-camaro-ss-lt1-1-x-1-lowering-springs","title":"BMR Suspension® (16-24) Camaro SS\/LT1\/ZL1 .75\" x 1\" Lowering Springs","description":"\u003ch1\u003eCOMPATIBLE: (6.2L)\u003c\/h1\u003e\n\u003ch1\u003e2020 - 2024 CHEVROLET CAMARO LT1\u003c\/h1\u003e\n\u003ch1\u003e2016 - 2024 CHEVROLET CAMARO SS\u003c\/h1\u003e\n\u003ch1\u003e2017 - 2024 CHEVROLET CAMARO ZL1 \u003c\/h1\u003e\n\u003ch1\u003e \u003c\/h1\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan\u003eThere is nothing like the aggressive look of a car with the right stance! BMR Suspension believes the right springs go beyond looks—your 2016-newer Camaro needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBlending aesthetics and performance, BMR has designed the SP041 for the street performance crowd who want to use their cars in a variety of application. These springs will lower your Sixth Gen Camaro, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The linear spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBMR Suspension lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan\u003e- Designed to fit 2016-Newer V8 Chevrolet Camaro (ZL1\/1LE compatible)\u003cbr\u003e- Drops your Camaro approximately .75\" in the front, 1\" in the rear\u003cbr\u003e- Linear spring rates\u003cbr\u003e- Improves handling and ride quality\u003cbr\u003e- Manufactured from chrome silicon high-tensile spring wire\u003cbr\u003e- Cold wound on a CNC Coiling Machine to exact specifications\u003cbr\u003e- Lifetime warranty against spring sag\u003cbr\u003e- Stress-relieved at 750 degrees F\u003cbr\u003e- Shot-peened\u003cbr\u003e- Computer tested for accurate height and spring rate\u003cbr\u003e- Designed in the U.S.A.\u003cbr\u003e- Made in the U.S.A.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstall Guide:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.bmrsuspension.com\/siteart\/install\/TCA018.pdf\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/WRENCH_ab92221f-b81a-4bce-92b1-f05176698c3c_small.jpg?v=1552426028\"\u003e\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/images.holley.com\/prop65_warning.png\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/images.holley.com\/prop65_warning.png\"\u003e\u003c\/p\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWarranty:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/10secondracing.com\/pages\/bmr-suspension%C2%AE-product-warranty\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/BMR_LOGO_large.jpg?v=1555459256\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h1\u003e","brand":"BMR Suspension","offers":[{"title":"Front","offer_id":40540043444318,"sku":"SP042","price":139.95,"currency_code":"USD","in_stock":true},{"title":"Rear","offer_id":40540043477086,"sku":"SP043","price":149.95,"currency_code":"USD","in_stock":true},{"title":"Front + Rear","offer_id":40540043509854,"sku":"SP041","price":269.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/Screenshot2024-03-27at2.43.49PM.png?v=1711565262"},{"product_id":"bmr-93-02-f-body-non-adj-upper-a-arms-polyurethane-black-hammertone","title":"BMR 93-02 F-Body Non-Adj. Upper A-Arms (Polyurethane) - Black Hammertone","description":"\u003cp\u003eA-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel plate, deflection is eliminated with A-arms from BMR's suspension. BMR's AA001 Upper A-arms come with new upper ball joints, and greaseable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR's AA001 Upper A-arms reduce weight and eliminate upper A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The means you get a great blend of performance and comfort for street performance, drag race, and handling applications. The AA001s feature a 3 degree improved ball joint angle for lowered cars. These are compatible with all stock components. The non-adjustable design means installation is quick and easy, and once they are bolting, you're ready to go. BMR's suspension AA001 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/b4aca5aac7c3e15b2d094cf533c71c12.PDF\"\u003eApplication Guide\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eIndianapolis 500 Pace Car\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1996-1997\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eRS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZ28\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1998-2002\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003eZ28 SS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eFirebird\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eFirebird\u003c\/td\u003e\n\u003ctd\u003eFormula\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1993-2002\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eFirebird\u003c\/td\u003e\n\u003ctd\u003eTrans Am\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1994\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eFirebird\u003c\/td\u003e\n\u003ctd\u003eTrans Am GT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":40838075416670,"sku":"BMRAA001H","price":329.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/2bfe80995086c881f9647be285651da6.jpg?v=1716210633"},{"product_id":"bmr-78-87-g-body-upper-and-lower-a-arm-kit-black-hammertone","title":"BMR 78-87 G-Body Upper And Lower A-Arm Kit - Black Hammertone","description":"\u003cp\u003eA-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch and 1.500-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR's suspension. BMRs AA030 Upper and Lower A-arms are fitted with heavy-duty ball joints and greaseable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA030 Upper and Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR's suspension AA030 Non-Adjustable Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH010 (Includes upper and lower control arm hardware - Highly Recommended) also available.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/c60fb4566b900ef251e9fb6e0deeb127.PDF\"\u003eApplication Guide\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1982-1983\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eEstate Wagon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eGNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1984-1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eGrand National\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eLimited Turbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1982\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1983-1986\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eT-Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1981\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1983\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic Estate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1981\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic Landau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eEstate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eLandau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003ePolice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979,1981-1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1983\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eCL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1981\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eLandau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1986-1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978,1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1983-1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1981\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eBrougham\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1981\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1979\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eVista Cruiser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eVista Cruiser Brougham\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1987\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1981-1987\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eBrougham\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1984-1987\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1983\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eLJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1980\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eSJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":40838080036958,"sku":"BMRAA030H","price":829.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/548b1544902b5fde2a95174ff6724329.jpg?v=1716210787"},{"product_id":"bmr-78-87-g-body-upper-and-lower-a-arm-kit-red","title":"BMR 78-87 G-Body Upper And Lower A-Arm Kit - Red","description":"\u003cp\u003eA-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch and 1.500-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR's suspension. BMRs AA030 Upper and Lower A-arms are fitted with heavy-duty ball joints and greaseable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA030 Upper and Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR's suspension AA030 Non-Adjustable Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH010 (Includes upper and lower control arm hardware - Highly Recommended) also available.\u003c\/p\u003e\u003ca href=\"https:\/\/d32vzsop7y1h3k.cloudfront.net\/c60fb4566b900ef251e9fb6e0deeb127.PDF\"\u003eApplication Guide\u003c\/a\u003e\u003cbr\u003e\u003cp\u003eThis Part Fits:\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1982-1983\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eEstate Wagon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eGNX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1984-1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eGrand National\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1987\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1982\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eLimited Turbo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1982\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1983-1986\u003c\/td\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003eT-Type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1981\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1983\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic Estate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1981\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic Landau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eClassic Sport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eEstate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eLandau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003ePolice\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979-1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMalibu\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979,1981-1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1983\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eCL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1981\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eLandau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1986-1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978,1980\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1983-1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003eSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1981\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eBrougham\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1980-1981\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1979\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eVista Cruiser\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979\u003c\/td\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003eVista Cruiser Brougham\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1987\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1981-1987\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eBrougham\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1984-1987\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eLE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1983\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eLJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1978-1980\u003c\/td\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003eSJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"BMR Suspension","offers":[{"title":"Default Title","offer_id":40838080299102,"sku":"BMRAA030R","price":829.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/files\/3480dc07c2b0c0c9baec7fabdfdaffdf.jpg?v=1716210790"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0030\/5315\/8515\/collections\/Screen_Shot_2021-03-21_at_11.12.24_AM.png?v=1616339577","url":"https:\/\/10secondracing.com\/collections\/bmr-suspension%c2%ae.oembed","provider":"10 Second Racing","version":"1.0","type":"link"}